ORB PORTABLE LED LIGHT QUICK START GUIDE MLB7-1036-RGB v4.
GETTING STARTED Thank you for choosing the Orb Smart Portable LED Light by Monster Smart Illuminessence. This quick start guide will help you with setup and installation of your device. WHAT’S IN THE BOX • 1 x Orb Light • 1 x 4ft USB charging cable • 1 x Quick Start Guide WHAT DO YOU NEED? • Cellphone or tablet with Android 6.0 or higher / iOS 10 or higher • Wi-Fi router with an internet connection • Wi-Fi 2.4GHz 802.11n Before setup, make sure your phone is connected to the 2.
SETUP COMPLETE SETUP BEFORE INSTALLATION STEP 1 Remove your Orb and charging cable from the box. The Orb has a built-in rechargeable battery that can be charged using the included micro USB to USB Type-A cable and any 5v USB power source (not included) NOTE: For best results, fully charge the Orb before setup. Orb Light micro USB charging port with cover (at back) micro USB charging cable STEP 2 Download the app from the App Store (for iPhone) or Google Play Store (for Android phones).
STEP 3 Make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network that your Orb will be placed on. Open the app and create an account by following the on-screen instructions. STEP 4 It is recommended to 1. Charge the Orb before setup and 2. First pair the Orb in a location indoors and close to your router. Press and hold the POWER button for 3 seconds to turn the unit on. Press and hold the RESET button for 6 seconds to enter pairing mode (or change between pairing modes).
STEP 5 In the app, select the “+” in the upper right corner of the home screen to add a new device and then select “Lighting (Wi-Fi)” to add your device. If needed, click “Net Pairing Mode” in the upper right to switch the default EZ pairing mode for 2.4GHz Wi-Fi networks to AP mode for mixed Wi-Fi networks. STEP 6 EZ Confirm that the LED indicator is RAPIDLY blinking. mode Confirm that the network displayed is your 2.
HOW TO USE CONTROLS Your Orb Portable LED Light can be easily controlled by the built-in buttons, using the app to access advanced and customizable lighting effects, or by using a compatible voice assistant product for hands-free operation.
APP CONTROL: EDIT SCENES The app gives you full control over all the functions of the Orb, as well as the ability to edit preset scenes to create your own custom scenes. Below are some of the editable scene features for Orb: RESET: reset to the default scene settings PICTURE: edit your scene thumbnail NAME: edit your scene name COLORS: add or edit colors and arrange and adjust them as you wish Individual color adjustments TIP: Set Brightness to 0% create an “off” color.
BATTERY/CHARGING The Orb has a built-in rechargeable battery that can be charged using the included micro USB to USB Type-A cable and any 5v USB power source (not included) USB cover micro USB LED indicator When the battery is low, the LED indicator will glow RED (when the USB cover is closed, the LED will shine through) While charging, the LED will glow GREEN. When charging is complete, the LED will turn OFF. NOTE: Under normal operation, the Orb can provide over 6hrs of light.
VOICE CONTROL OPTIONAL AMAZON VOICE CONTROL SETUP Make sure your Amazon Alexa device is installed and setup STEP 1 : Open the Alexa app and go to Skills in the menu STEP 2 : Search for and choose STEP 3 : Enable the Skill and authorize your account using your login information NOTE : 1: Use the same login information that you used to create your Monster Smart account 2: 3: At any time, go to the Alexa app to set nicknames and rooms for your devices.
GOOGLE VOICE CONTROL SETUP Make sure your Google Assistant device is installed and setup.
SIRI VOICE CONTROL SETUP Requires iPhone running iOS 12 or later.
NOTES WATER-RESISTANCE Your Orb is water-resistant and is suitable for both indoor and outdoor use. To ensure maximum water protection: • Keep the silicon USB cover tightly sealed. • Do not charge the Orb in wet environments. • Do not submerge the Orb in water. • Avoid dropping or damaging the Orb.
FCC Compliance This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
satisfied with this Product for any reason, you may return it in its original condition to the retailer in compliance with the retailer’s return policy. 3. WARRANTY CONDITIONS; HOW TO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a claim under this Limited Warranty, the owner of the Product must (a) visit monsterilluminessence.
