PRISM 3D LED ART PANELS Modular 4 Panel Starter Kit DESIGN GUIDE MLB7-1034 / MLB7-1038 v2.
GETTING STARTED Thank you for choosing the Prism 3D LED Art Panels by Monster Smart Illuminessence. This Design Guide will help you with creating the design of your Prism pattern. Please consult the Quick Start Guide for all setup and installation instructions. DESIGN TIPS • To ensure all panels light up, make sure all the connectors always point GREEN side AWAY from the controller.
EXAMPLE PATTERNS PRISM STARTER KIT The starter kit includes one controller/power kit, four panels, and four connectors. There are many design options; here are just a few examples to get you started: USE THE DIRECTIONAL MARKERS The arrow on the back of each panel indicates the direction that the LED light patterns will flow. Using these arrows creatively can change the same pattern into different visual designs.
STARTER KIT + ADD-ON PACK Think big and make geometric patterns. Each add-on pack includes two additional panels and two connectors that can be easily added into your starter design. MAKING HEXAGONS Once you add an add-on pack, you can make a full hexagon! When making a hexagon there will be one pair of panels that will not be linked by a connector, this ensures that the power flows evenly throughout the design.
STARTER KIT + 2x ADD-ON PACKS (max with one power kit) Have big design plans? Keep expanding your Prism pattern! Just be sure to group in an additional power kit and controller after every 8 x Prism panels to maintain normal operation. no connector no connector DON'T FORGET: Directional connectors - If your controller is placed in the middle of your design, take extra care to keep the power flowing in the right direction - all the connectors should always point GREEN side AWAY from the controller.
MULTIPLE STARTER KITS + ADD-ON PACKS (grouped together in the app) Using the app, you can group multiple Prism kits together so that they all operate in unison, no matter how many controllers and segments you have connected. TIP: Make sure that each controller is only connected to up to 8 x panels at a time.
