How to Guide

• To ensure all panels light up, make sure all the connectors

always point GREEN side AWAY from the controller.

• Only one GREEN side should ever be connected to any one

panel at a time (but it can be connected to any port).

• Pointing the directional markers on the back of each panel

towards or away from each other will create dierent lighting

eects when panels are combined (colors used for reference).

• Thanks to the geometry of the mounting bracket, you can remove,

rotate, and replace a panel at any time during or after installation .

GETTING STARTED

Thank you for choosing the Prism 3D LED Art Panels by Monster

Smart Illuminessence. This Design Guide will help you with

creating the design of your Prism pattern.

Please consult the Quick Start Guide for all setup and

installation instructions.

GREEN always

points AWAY

from controller

RED always

points TOWARDS

controller

• For best results, position the controller somewhere on the left

or the bottom of your pattern.

DESIGN TIPS

• Plan to install your Prism near enough to a power outlet for the

adapter cord to reach - ensure it is not a tripping hazard.

• Save these instructions for future reference.