Users Manual

SMART WIFI BRIDGE
USER MANUAL
MML-WFB
Model : MML-WFB
Color: RGB/RGBW
Input Voltage: DC5V, 0.5A
Control Distance: 20 Meters
Features:
Wifi connect, mobile phone
APP control, Android and
IOS support
Multiple color changing
Brightness changing
Remote controllable
after connecting to
internet
Voice and intelligent speaker
control
Timer switch
Parameters：
Dimension:
1
2 3
Control Diagram:
Precautions:
1. Do not place metal objects around the controller and smart
WIFI Bridge which will block wifi signal.
2. Working voltage of power supply should be 5V.
3. Confirm that the connection is correct before powering up.
Remotely control all your monster IlluminEssence light at same time
Function Description:
ON/OFF
Control Area
DIY keys
Micro USB Reset Button
Color changing ring
Working signal light
Wifi signal light
Function Operation
WIFI Bridge
Keys
Control Description
Turn on the light
Click
Click
ON
OFF
Brightness adjusting
(Only available on
Static mode)
Speed adjusting
(Only available
on Dynamic mode)
Press S+ within
5 seconds when
powered up
Press S- within
5 seconds when
Mode switching
DIY keys
Color changing
Wifi signal light
Working signal light
Reset button
Click
Long Press
Click
Long Press
Click
Long Press
Click/Long Press
Touch
Indicator Light
Indicator Light
Long Press
Long press 5 seconds for Wifi connection
Indicating RF control signal
Wifi connection available when
indicator light flash quickly
RGB color changing
DIY key for over 1 second, which will define the DIY scene
for future use. Click one DIY button will change to your
lasting defined scene.
Color changing modes switching
Speed adding/reducing by steps
Speed adding/reducing quickly
Brightness adding/reducing by steps
Brightness adding/reducing quickly
Un pairing
Pairing
LED light will flash 3 times
when paired
LED light will flash 5 times
when unpaired
Only used in RGBW series,
not applicable to current
RGB series
The APP is compatible with Android4.0 and iOS8.1 and higher version.
Download APP
1: Search "Smart Life” from APP store or Google play.
2: Scan the QR code from the label or user manual.
1 2 3 4
Log In / Sign Up
Open the Smart Life APP, sign up for a new account or log in with
an existing account.
APP Connection:
Preparation: Use the prepared Led strip and Controller, Pair WIFI Bridge
with Controller first. Check if the WIFI Bridge can control your Led strip.
1. Power up the WIFI Bridge
2. WIFI signal light
Check if the WIFI signal light is flashing quickly.
(If the light is blinking fast, skip the reset step)
(1) If the WIFI signal light is not flashing, press the Reset button for over 5 seconds
before you start connection.
(2) If the WIFI signal light is not flashing, plug and unplug the USB port for 3 times before
you start connection.
3. Choose the APP main interface, select “Add Device", select "Lighting", select "Light
Source (Wi-Fi)", then follow the further instructions
(1) Please confirm that the phone and controller are in the same
WIFI environment;
(2) Please confirm that WIFI is in 2.4G signal mode;
(3) If the WIFI signal is 5G mode, please click "compatibility mode" in
the upper right corner of the "confirm the light is flashing" page.
(4) Select the WIFI connected to the smart device, input the
WIFI/password, and then click "OK" to wait for the matching to
succeed. (Make sure smart devices share the same WIFI)
APP + WRFC
HOME
CLUB 1 CLUB 2 LOUNGE BEACH
SUNSET CHRISTMAS INDEPENDENCE HALLOWEEN
IRCScene
1 2 3
IRCScene
APP + WRFC
HOME
ON
APP Instruction:
1. Under the IRC interface, all changing functions are available,
same as your WIFI Bridge. Timing function added.
2. Eight scenes available under the Scene interface.
For any product and APP updating,
please contact with customer service.
Federal Communication Commission
Interference Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable prote
ction against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
• Consult the dealer or an experienced radio/ TV
technician for help.
FCC RF Radiation Exposure Statement Caution: To
maintain compliance with the FCC’s RF exposure
guidelines, place the product at least 20cm from nearby
persons.
The Responsible (located within the United States)
party information:
Company Name: Vanco International Batavia, IL 60510
Telephone Number: [phone] or [phone]
Email: [e-mail]
The name and model number of the product:
Model Number
MML-WFB
SAW30-120-2000U
Model Name
Smart WIFI Bridge
Power Supply
5 6 7 8 9