COLLECTIVE MOUNT Instruction Manual Bedienungsanleitung Mode d‘emploi
GENERAL ASSEMBLY INFO AND HOW TO PROFILE SLOT NUT OR HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED extension for better tightening force MTSIM COLLECTIVE MOUNT MANUAL 2
UNIVERSAL CONNECTOR M8x30 universal connector slot nut M8 ALTERNATIVE M8x30 very loose pre-assembled universal connector slide in MTSIM COLLECTIVE MOUNT MANUAL 3
extension for better tightening force BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm] 25 M8x25 8 M8x25 25 8 M8x35 8 M8x35 35 8 35 PROFILE CAP ASSEMBLY MTSIM COLLECTIVE MOUNT MANUAL 4
[dimensions in mm / different scales] No extra or spare parts listed! PARTS 1x 40 40 1x 260 80 40 1x 40 40 2x 140 40 40 1x 80 2x Ø20 140 40 BAG 1 6x 6x M8 8 2x 25 2x Ø8 6x 30 8,4 24 MTSIM COLLECTIVE MOUNT MANUAL 5
BAG 2 2x 8x 6,4 12 4x 2x M6 M6 4x 6 6 2x 14 20 BAG 3 (VPC ROTOR ONLY) 2x 6 1x 16 4 4x 16 2x M6 1x 2x 6,4 12 8,4 24 ADDITIONAL PARTS FOR CHAIR MOUNT 1x Attachment plate as ordered. Additional screw bag as shown in CHAIR-MOUNT MANUAL.
MOUNTING THE SEAT-ATTACHMENT ON MONSTERTECH FLIGHT CHAIRS 3x M6x30 For mounting the seat-attachment on other chairs have a look at the CHAIR-MOUNT MANUAL.
ASSEMBLY WITHOUT ARMREST One of the slot nuts has to be turned.
cap cap cap cap 2x M8x25 2x washer Ø24 How to assemble the collectives is shown at the end of the manual.
ASSEMBLY WITH ARMREST MTSIM COLLECTIVE MOUNT MANUAL 10
pre-assembled universal connector 140 mm pre-assembled universal connector 2x pre-assembled universal connector MTSIM COLLECTIVE MOUNT MANUAL 11
cap cap cap cap cap 2x M8x25 2x washer Ø24 MTSIM COLLECTIVE MOUNT MANUAL 12
ASSEMBLY ON EXISTING CHAIR-MOUNT (ADD-ON) pre-assembled universal connector pre-assembled universal connector MTSIM COLLECTIVE MOUNT MANUAL 13
turned 2x pre-assembled universal connector cap cap cap MTSIM COLLECTIVE MOUNT MANUAL 14
2x slot nut M8 2x pre-assembled universal connector MTSIM COLLECTIVE MOUNT MANUAL 15
MTSIM COLLECTIVE MOUNT MANUAL 16
MOUNTING A VPC ROTOR 4x M4x16 flat head washer Ø24 M8x25 round head (original from VPC) MTSIM COLLECTIVE MOUNT MANUAL 17
2x slot nut M6 2x washer Ø12 black 2x M6x16 black MTSIM COLLECTIVE MOUNT MANUAL 18
MOUNTING A WINWING COLLECTIVE 4x slot nut M6 brackets 2x washer Ø12 2x M6x20 MTSIM COLLECTIVE MOUNT MANUAL 19
2x M6x14 2x M6x20 4x washer Ø12 2x washer Ø12 2x M6 nut MTSIM COLLECTIVE MOUNT MANUAL 20
26-07-2022
WARNING NOTICES CAUTION! Do not clamp your fingers while attaching the universal collective mount. CAUTION! Check before usage if all screws are tightened. DANGER: Contains small parts not suitable for children under 3 years. Only suitable for children over 12 years and adults. All MTSIM products are hand assembled and quality checked. The mount is designed for usage only with a computer controller (e.g. joystick or throttle). We exclude liability if the product is used for purposes other than intended.