PRISM 3D LED ART PANELS Modular 4 Panel Starter Kit QUICK START GUIDE MLB7-1034-RGB v3.
GETTING STARTED Thank you for choosing the Prism 3D LED Art Panels by Monster Smart Illuminessence. This Quick Start Guide will help you with setup and installation of your device. WHAT’S IN THE BOX • 4 x Prism LED panels • 4 x Prism mounting brackets with 3M Command damage-free adhesive (preinstalled on each panel) • 4 x Prism connectors • 1 x Prism controller • 1 x Power adapter (12V 3A, 6ft/1.8m cord) • 1 x Quick Start Guide • 1 x Design Guide WHAT DO YOU NEED? • Cellphone or tablet with Android 6.
SETUP COMPLETE SETUP BEFORE INSTALLATION STEP 1 Remove your Prism panels and all components from the box. Note that the mounting bracket and adhesive tape will be preinstalled on each panel.
STEP 3 Make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network that your Prism will be placed on. Open the app and create an account by following the on-screen instructions. STEP 4 It is recommended to pair Prism in a location close to your router BEFORE installation. Panels do not need to be connected to the controller to pair. Plug the power adapter into the bottom of the controller and connect the other end to a powered wall outlet.
STEP 5 In the app, select the “+” in the upper right corner of the home screen to add a new device and then select “Lighting (Wi-Fi)” to add your device. If needed, click “Net Pairing Mode” in the upper right to switch the default EZ pairing mode for 2.4GHz Wi-Fi networks to AP mode for mixed Wi-Fi networks. STEP 6 EZ Confirm that the LED indicator is RAPIDLY blinking. mode Confirm that the network displayed is your 2.4GHz Wi-Fi (default) network, then enter your Wi-Fi password and click “Confirm”.
INSTALLATION STEP 1 Before installing anything, try out different shapes and patterns with your panels on the floor or a large table to decide what you would like to create! Consult the Design Guide for ideas. examples: IMPORTANT: • Plan to install your Prism near enough to a power outlet. • Place the controller on the left side of your pattern on the RED end of one connector. • To ensure all panels light up, make sure all the connectors always point GREEN side AWAY from the controller.
STEP 3 Remove the panel, leaving the bracket in place on the wall. Press firmly on the bracket for 10 seconds to ensure a strong hold. PRESS FIRMLY for 10 sec (damage-free removal tab) NOTE: If you ever want to uninstall your Prism panel in the future, simply hold the bracket and SLOWLY stretch the damage-free removal tab down along the wall to remove. They can be reinstalled with new 3M strips (rated at least 3lbs).
STEP 5 With connectors installed, return your first panel to the wall by centering it over the mounting bracket so it snaps into place. NOTE: Ensure the directional marker is pointing in the desired direction for your pattern. NOTE: Ensure the RED connector is at the left side of the panel and that any other connectors are GREEN. STEP 6 Build out your Prism pattern by repeating these steps with more panels and connectors, moving away from the controller. STEPS: A.
STEP 7 Once your pattern is complete, plug the power adapter into the controller and attach the controller to the open RED connector on the panel in the bottom left corner of your pattern. STEP 8 Plug it in and you’re done! Your Prism is now setup, installed, and ready to use. Remember, you can always easily remove a panel to rotate the directional marker or add more connectors and panels from add-on kits to change or expand your design.
TROUBLESHOOTING HAVING TROUBLE WITH SETUP? Don’t return this product to the retailer, we’re here to help. Please call for customer support: 866-246-2008 Q: Why is my device failing to connect to my Wi-Fi network? A1: Make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network that your device will be placed on. A2: You may first need to enable and allow location services on your phone or tablet to find nearby devices. A3: If your Wi-Fi network is a mixed 2.
HOW TO USE CONTROLS Your Prism 3D LED Art Panels can be easily controlled by the controller, using the app to access advanced and customizable lighting effects, or by using a compatible voice assistant product for hands-free operation.
APP CONTROL: CUSTOM SCENES The app gives you full control over all the functions of the Prism, as well as the ability to edit preset scenes and create your own custom scenes.
VOICE CONTROL OPTIONAL AMAZON VOICE CONTROL SETUP Make sure your Amazon Alexa device is installed and setup STEP 1 : Open the Alexa app and go to Skills in the menu STEP 2 : Search for and choose STEP 3 : Enable the Skill and authorize your account using your login information NOTE : 1: Use the same login information that you used to create your Monster Smart account 2: 3: At any time, go to the Alexa app to set nicknames and rooms for your devices.
GOOGLE VOICE CONTROL SETUP Make sure your Google Assistant device is installed and setup.
SIRI VOICE CONTROL SETUP Requires iPhone running iOS 12 or later.
NOTES WARRANTY 1 Year Limited Warranty - Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.
FCC Compliance This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
satisfied with this Product for any reason, you may return it in its original condition to the retailer in compliance with the retailer’s return policy. 3. WARRANTY CONDITIONS; HOW TO GET SERVICE IF YOU WANT TO CLAIM UNDER THIS LIMITED WARRANTY Before making a claim under this Limited Warranty, the owner of the Product must (a) visit monsterilluminessence.
