User's Manual

Confidential Preliminary – Subject to Change
 2011 Montage Asia Page 15 of 15
Installation information
The Tracker uses a simple cabling arrangement and supports splicing into an OBDII exten-sion
for power. Connection to the vehicle is made through a 3mm pitch rectangular header con-nection
common to the automotive market.
As any GPS location device, the TRAXIT Super 2G GPS Tracke should be installed in a
vehicle, so that it has an unob-structed view of the sky during normal operation. Double sided
foam tape can be used to secure the surface not facing the sky, if needed.
Lead
1.2kΩ
2.8V
GND
2.8V
50kΩ
To Circuit
NOTE
Equivalent Circuit for GP1 and GP2