Assembly Instruction
Assembly Instructions for Coffee Table
Thank you very much for purchasing our heirloom quality coffee table. Should you have any questions or need to
contact sales or support, please do not hesitate to contact our corporate offices at 888.889.3728 or via E-Mail at:
cs@montanawoodworks.com
Before beginning assembly please take a few moments to read the instructions carefully, understanding each step.
Likewise please also ensure that the hardware package contains the items as described here.
Tools Needed: Phillips Screw Driver
Parts List: (1) Table Top, (1) Shelf, (2) Legs
Hardware List: (20) Phillips Screws
Assembly Directions:
Step 1. Lay table top face down on a soft, non-marring surface.
Step 2. Place right leg assembly on table top and align with position marks.
Step 3. Tighten pre-started Phillips screws until secure.
Step 4. Repeat step 3 for left leg.
Step 5. Carefully set table onto a side position.
Step 6. Place shelf on top of leg cross supports.
Step 7. Tighten pre-started Phillips screws until secure.
Your new coffee table is now fully assembled. Enjoy!
PROUDLY MADE IN THE U.S.A.
Please Note: If you purchased your coffee table “ready to finish” special care must be taken to properly apply a high grade final
finish in a timely manner. Doing so will help protect your purchase from discoloration and damage caused by exposure to ultra-
violet light. See use and care instructions for further information. Failure to adequately protect item by the applications of a final
finish may void warranty.