Instructions / Assembly

ank you for purchasing your heirloom quality furniture from Montana Woodworks®. Should you have
any questions or need to contact sales or support, please do not hesitate to contact our corporate oces at
888.889.3728 or via E-Mail at: [e-mail]
Tools Needed: Phillips or Square Drive Screw Driver
Before beginning assembly, please take a few moments to carefully read the instructions, familiarize yourself
with the components and understand each step of the process. Likewise, please ensure that the hardware package
contains the items as described below.
Parts List: (1) Table Top, (1) Shelf, (2) Leg Assemblies
Hardware List: (20) Screws
Assembly Instructions:
Step 1. Remove components from shipping boxes. You may lay the cardboard on the oor to prevent marring of
nish.
Step 2. Lay table top face down on a so, non-marring surface.
Step 3. Place one leg assembly on table top and align with position marks.
Step 4. Tighten pre-started screws until secure.
Step 5. Repeat steps 3 & 4 for other leg assembly.
Step 6. Carefully set table on its side.
Step 7. Place shelf on top of leg cross supports.
Step 8. Tighten pre-started screws until secure.
PLEASE NOTE: If you purchased your item “ready to nish” special care must be taken to properly apply a high
grade nal nish in a timely manner. Doing so will help protect your purchase from discoloration and damage
caused by exposure to ultra-violet light and/or weather. if the products intended use is outside, please use an
exterior rated nish to also protect from weather damage. See use and care instructions for further information.
Failure to adequately protect item by application and as needed, re-application of a nal nish may void warranty.
Assembly Instructions for Coee/Cocktail Table