Instructions / Assembly

ank you for purchasing your heirloom quality furniture from Montana Woodworks®. Should you have
any questions or need to contact sales or support, please do not hesitate to contact our corporate oces at
888.889.3728 or via E-Mail at: [e-mail]
Tools Needed: 9/16” Wrench or Socket
Before beginning assembly, please take a few moments to carefully read the instructions, familiarize yourself
with the components and understand each step of the process. Likewise, please ensure that the hardware package
contains the items as described below.
Parts List: (1) Table Top Assembly, (4) Legs
Hardware List: (4) 5” Lag Bolts, (4) Washers
Assembly Instructions:
Step 1. Remove components from shipping boxes. You may lay the cardboard on the oor to prevent marring of
nish.
Step 2. Lay table top face down on a so, non-marring surface.
Step 3. Place one leg in the corner of the table top and align with pre-drilled hole.
Step 4. Insert and tighten a lag bolt and washer until snug. DO NOT OVERTIGHTEN!
Step 5. Repeat for remaining three legs.
PLEASE NOTE: If you purchased your item “ready to nish” special care must be taken to properly apply a high
grade nal nish in a timely manner. Doing so will help protect your purchase from discoloration and damage
caused by exposure to ultra-violet light and/or weather. if the products intended use is outside, please use an
exterior rated nish to also protect from weather damage. See use and care instructions for further information.
Failure to adequately protect item by application and as needed, re-application of a nal nish may void warranty.
Assembly Instructions 4 Post Tables