Instructions / Assembly

ank you for purchasing your heirloom quality furniture from Montana Woodworks®. Should you have
any questions or need to contact sales or support, please do not hesitate to contact our corporate oces at
888.889.3728 or via E-Mail at: [e-mail]
Tools Needed: 1/2” Wrench/Socket, Hammer
Before beginning assembly, please take a few moments to carefully read the instructions, familiarize yourself
with the components and understand each step of the process. Likewise, please ensure that the hardware package
contains the items as described below.
Parts List: (1) Headboard, (1) Footboard, (2) Side Rails, (2) Pieces of Plywood, (3) Wooden Support Slats
Hardware List: (8) 2 1/2” Lag Bolts, (8) Washers, (8) Lag Bolt Inserts
Assembly Instructions:
Step 1. Layout all parts in a large, well lit area. DO NOT THROW AWAY THE TWO PIECES OF PLYWOOD!
Step 2. Insert a lag shield insert into each of the 8 pre-drilled holes in the headboard and footboard. Using a
hammer, tap them in until ush with wood. Be careful not to damage or mar the wooden surfaces.
Step 3. Stand headboard and footboard assemblies upright and separate them by the length of the included side
rails for ease of assembly.
Step 4. Place one washer on each of the 8 lag bolts.
Step 5. With one person holding the side rail, the other inserts a lag bolt with washer through the slot on the
metal mounting ange, screwing it into the corresponding hole on the headboard. Do not fully tighten.
NOTE: e side rails should be positioned so that the steel “L” channel is upside down. See illustration on back.
Step 6. Repeat step 5 for the footboard and opposite side until all 8 lag bolts are in place. Again, do not tighten
fully.
Step 7. Place wooden mattress support slats onto metal “L” channel and space evenly.
Step 8. Place plywood on top of wooden mattress support slats. e plywood provides a mattress support
foundation. A box spring is not necessary but can be used if so desired.
Step 9. Tighten all lag bolts fully at this time.
PLEASE NOTE: If you purchased your item “ready to nish” special care must be taken to properly apply a high
grade nal nish in a timely manner. Doing so will help protect your purchase from discoloration and damage
caused by exposure to ultra-violet light and/or weather. if the products intended use is outside, please use an
exterior rated nish to also protect from weather damage. See use and care instructions for further information.
Failure to adequately protect item by application and as needed, re-application of a nal nish may void warranty.
Assembly Instructions Platform Bed