SDS

Page 8/15
Safety Data Sheet
acc. to OSHA HCS
Printing date 12/11/2019 Reviewed on 12/11/2019
Trade name: MONTANA GOLD COLORS
(Contd. of page 7)
50.0.2
·
Penetration time of glove material
Butyl rubber gloves with a thickness of 0.4 mm are resistant to:
Acetone: 480 min
Butyl acetate: 60 min
Ethyl acetate: 170 min
Xylene: 42 min
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
Eye protection:
Tightly sealed goggles
*
9 Physical and chemical properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Aerosol
Color:
According to product specification
·
Odor:
Characteristic
·
Odor threshold:
Not determined.
·
pH-value:
Not determined.
·
Change in condition
Melting point/Melting range:
Undetermined.
Boiling point/Boiling range:
Not applicable, as aerosol.
·
Flash point:
Not applicable, as aerosol.
·
Flammability (solid, gaseous):
Not applicable.
·
Ignition temperature:
240 °C (464 °F)
·
Decomposition temperature:
Not determined.
·
Danger of explosion:
Not determined.
·
Explosion limits:
Lower:
2.1 Vol %
Upper:
26.2 Vol %
·
Vapor pressure at 20 °C (68 °F):
4000 hPa (3000.2 mm Hg)
·
Density at 20 °C (68 °F):
0.9 g/cm³ (7.5 lbs/gal)
·
Relative density
Not determined.
·
Vapor density
Not determined.
·
Evaporation rate
Not applicable.
·
Solubility in / Miscibility with
Water:
Not miscible or difficult to mix.
·
Partition coefficient (n-octanol/water):
Not determined.
·
Viscosity:
Dynamic:
Not determined.
Kinematic:
Not determined.
·
Solvent content:
Organic solvents:
75.3 %
Water:
0.2 %
(Contd. on page 9)
USA