W24A active, biamped, processor controlled loudspeaker system
active, processor controlled, bi-amped speaker system Il lampo con la freccia inserito in un triangolo equilatero avvisa l'utilizzatore della presenza di tensione pericolosa, senza isolamento, all'interno dell'apparecchio che potrebbe essere sufficientemente alta da generare il rischio di scossa elettrica. Il punto esclamativo inserito in un triangolo equilatero avvisa l'utilizzatore della presenza di importanti istruzioni per l'utilizzo e per la manutenzione.
active, processor controlled, bi-amped speaker system W24A Introduzione La grande adattabilità di questa cassa alle diverse situazioni di impiego consente di risolvere efficacemente ogni tipo di installazione e di rispondere in maniera ottimale alle diverse esigenze professionali di amplificazione e distribuzione del suono. 2 amplificatori MosFet in classe AB 800 W continui (1100 W di picco) per le frequenze basse. 250 W continui (350 W di picco) per le medio-alte.
active, processor controlled, bi-amped speaker system W24A Pannello controlli e connessioni 2 PUSH 1 2 1 3 3 6 E F U S 7 4 5 1 Il sistema acustico W24A è dotato di prese XLR maschio (OUT) e femmina (IN) collegate in parallelo: ciò semplifica il collegamento di più sistemi. ❚ uscita mixer ➔ ingresso W24A (presa 'IN') ❚ uscita W24A (presa 'OUT') ➔ ingresso della W24A da collegare in parallelo (presa 'IN').
active, processor controlled, bi-amped speaker system W24A Importante ! Cura e manutenzione del prodotto: • Posizionate la cassa lontano da fonti di calore (lampade, fari, sorgenti luminose di alta potenza, caloriferi o qualsiasi altro oggetto che produca calore). • Evitate di esporre la cassa alla radiazione solare diretta, ad eccessive vibrazioni e ad urti violenti.
active, processor controlled, bi-amped speaker system W24A Importante ! Collegamento alla rete: • Accertarsi che la tensione di alimentazione corrisponda a quella indicata sul pannello (sotto la presa per il cavo di alimentazione). • Collegare il cavo di alimentazione ad una presa di corrente dotata di contatto di terra di sicura efficienza. Utilizzare solamente un cavo riportante i marchi di sicurezza applicabili nel paese di impiego.
active, processor controlled, bi-amped speaker system The lighting flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to humans. The exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions.
active, processor controlled, bi-amped speaker system W24A Introduction Two class A-B MosFet power amplifiers 800 W continuous (1100 W peak) for the bass section 250 W continuous (350 W peak) for the mid/high section. Its adaptability to various applications allows the W24A to be used in any type of installation ensuring optimum results to any professional requirement for sound reinforcement and distribution.
active, processor controlled, bi-amped speaker system W24A Control and connection panel 2 PUSH 1 2 1 3 3 6 E F U S 7 4 5 1 The W24A speaker system is equipped with XLR male (OUT) and female (IN) parallel connected sockets allowing easier daisy-chaining. ❚ Mixer output ➔ W24A input ('IN' socket) ❚ W24A output ('OUT' socket) ➔ input ('IN' socket) of the W24A to be connected in series. ☛ See 'connectors' and 'connection example' at pages 15 and 16. 2 Main volume (VOL).
active, processor controlled, bi-amped speaker system W24A Important ! Product care and maintenance: • Do not expose the enclosure to heat sources (lamps, lights, high power light sources, radiators or other products that produce heat). • Never expose the enclosure to direct sunlight, excessive vibrations or mechanical shocks. • Never operate and store the enclosure in damp or dusty places: this will avoid malfunctions, premature degrading of specifications.
active, processor controlled, bi-amped speaker system W24A Important ! Power supply connection: • Make sure that the mains voltage corresponds to the voltage indicated on the rear panel, under the mains socket. • Use only the factory supplied mains cable or, if a different plug style is needed, a suitable cable with a ground connection and marked with the safety approvals valid in the country of use.
active, processor controlled, bi-amped speaker system W24A APPENDIX __________________________________________ 13 Technical Specifications Dati tecnici __________________________________________ 14 Response curve Curva di risposta __________________________________________ 14 Block diagram Schema a blocchi __________________________________________ 15 Connectors Connettori __________________________________________ 16 Connection example Esempio di collegamento __________________________________________ 17
active, processor controlled, bi-amped speaker system W24A Specifications Speaker system • Components: - bass frequencies 2-way bass reflex custom designed to Montarbo specifications 2 x 12" high efficiency woofers, with neodymium magnet Woofer Mod. 12HPL76 - 8Ω Nominal diameter Frequency range Power capacity Sensitivity Rated impedance Net weight TThiele & Small Parameters fs Re Qms Qes Qts Vas ho B.
active, processor controlled, bi-amped speaker system W24A Response curve Block diagram APPENDIX 14
active, processor controlled, bi-amped speaker system W24A Connectors BALANCED MALE XLR CONNECTOR ▲ 1 GND Ground 2+ Hot 3Cold (IEC 268 standard) XLR BALANCED FEMALE SOCKET PUSH ▲ 2 1 3 ▲ U S F XLR MALE SOCKET 2 ▲ BALANCED FEMALE XLR CONNECTOR Note: the balanced LINE input can accept also unbalanced connectors (automatic unbalancing) Nota: L'ingresso bilanciato LINE accetta anche connettori sbilanciati (sbilanciamento automatico).
active, processor controlled, bi-amped speaker system W24A Connection example ▲ OUT ➩ IN OUT ➩ IN ▲ PUSH PUSH 2 1 2 1 3 3 ▲ ▲ U S F IN IN F E E U S ➩ ➩ Connecting the W24A active system to another W24A, to another W24A... OUT OUT W24A OUT ➩ W24A IN PUSH PUSH 2 1 2 3 1 3 ▲ ▲ U S F F E E U S IN ➩ ➩ IN Connecting the W24A active system to the mixing console: MIXER OUTPUT ➩ W24A INPUT R OUT L OUT AUX OUTPUTS PHANTOM 48V D.C. PHANTOM 48V D.C. PHANTOM 48V D.C.
active, processor controlled, bi-amped speaker system W24A Installation examples flyable: pole mountable: APPENDIX 17
active, processor controlled, bi-amped speaker system W24A Spare parts B01W242 Recessed ring A300212 Constant directivity, high frequency horn A300602 2" neodymium driver B01W240 / B01W241 Fly-track suspension system D52W24A Control and connection panel A300080 12" neodymium magnet woofer D10W24W Filter D52W18T Amplifier chassis: A088676 / A088677 Transport handle D00W18F Power amp. D20W242 Steel grid D52W18R Power amp.
elettronica Montarbo srl via G. di Vittorio 13 40057 Cadriano di Granarolo Bologna, Italy Tel. +39. 051. 76 64 37 Fax. +39. 051. 76 52 26 E-mail: mail@montarbo.com Internet: www.montarbo.com Le informazioni contenute in questo manuale sono state attentamente redatte e controllate. Tuttavia non si assume alcuna responsabilità per eventuali inesattezze. Questo manuale non può contenere una risposta a tutti i singoli problemi che possono presentarsi durante l'installazione e l'uso dell'apparecchio.