OWNER’S MANUAL Ceiling Fan Installation Instructions Total fan weight For 5CO52 Series Fans READ AND SAVE THESE INSTRUCTIONS QUALITY CEILING FANS
Installation SAFETY TIPS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS 1. Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999), including fire-rated construction. 2. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer. 3.
7 8 Canadian mounting only Safety Cable 9 Lag Screw Lag Screw Safety Cable Washer Hang assembled fan from the mounting bracket installed to ceiling in previous step. Make sure the fan is hanging straight. Rotate fan until the tab on the Mounting bracket engages the slot on the Downrod Ball. This must be done to prevent the fan body from rotating when the blades are in motion.
19 20 21 Remove every other screw as circled and save for later use. Install rubber pad between fan body and canopy. Place canopy over fan body aligning holes. 22 23 24 Hands free hook Replace the 3 screws removed and tighten securely. Check motor for shipping stabilizers and remove if present. Remove the all thread studs from the lower part of the mounting bracket. Hang fan from mounting bracket by the hands free hook into a closed hole on the edge of the Canopy.
TROUBLE SHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.
