Owner’s Manual Ceiling Fan Installation Instructions Total fan weight wirh light kit For 5ED56WAD Series Fans READ AND SAVE THESE INSTRUCTIONS Quality Ceiling fans
Installation SAFETY TIPS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 701999), including fire-rated construction. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.
7 Insert downrod into yoke on top of fan body. Align the hole in the downrod with hole in the yoke. Insert pin through the yoke and downrod until the point appears on the other side. Install the keeper. 10 8 9 Tighen set screws and nuts to secure downrod in yoke. Check the fan motor for shipping stabilizer and remove if present.
19 20 21 Put plug from fan through hole in switch plate. Install switch plate by placing over the 2 screws and twisting into place. Install screw removed and tighten all 3 screws securely. Push plug from fan and plug from switch plate together. 22 23 24 Loosen 3 screw on light plate as shown. Plug wire wire light white wire from fan to white from light kit. Then plug black from fan to black wire from kit. Place light kit over screws and twist direction of arrow into place.
Trouble Shooting If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.