Installation Guide

5
13 14 15
16
© 2020 Monte Carlo Fan Collections
1/2020
Install blade onto blade bracket with a top
plate by 4 blade screws provided. Tighten
screws securely. Repeat this process for
remaining blades.
Note: Make sure the side with a mark
“This side up” is installed upward.
Install the adapter onto fan housing with
set screws provided.
Install the final cap and finial.
Install blade assembly. Align the holes on
blade bracket with the screw holes on the
coupler of flywheel, and install the blade
assembly with set screws provided.
Tighten screws securely. Repeat this
process for remaining blade assemblies.
Blade bracket
Blade
Top plate
This side up
Coupler
Adapter
Final cap
Finial
C H I C A G O , I L
MOTOR SIZE:
WATTS:
DC178*12
40W