Installation Guide

6
© 2016 Monte Carlo Fan Company
11/2016
18 2019
21
22
23
Reinstall the screw removed in step 16.
Tighten all screws securely.
Connect white wire from fan to white wire
from LED light kit and then connect blue
wire from fan to blue wire from LED light
kit.
Note: If you don’t want to install the
fan with LED light, go to step 23 for
blanking plate installation.
Remove 3 preassembled screw from the
light pan. Save screws for later use.
Attach LED light kit onto the light pan,
aligning the holes on the LED light kit with
the screw holes on light pan. Reinstall the
screws removed in step 19. Tighten all
screws securely.
Attach lexan shade by locating dimples in
light pan with grooves on the Lexan
shade and twist clockwise until tight.
Attach blanking plate by locating dimples
in light pan with grooves on the blanking
plate and twist clockwise until tight.
Note: Do not install LED light kit if
use blanking plate.
Install LED Light Kit
Light pan
Lexan shade
Light pan
Install Blanking Plate
Blanking plate
LED light kit