Installation Sheet

6
© 2021 Monte Carlo Fan Collections
11/2021
17 18 19
Light shade
Blanking plate
Install the LED light fixture with quick
connectors. Be sure the plugs clasped
firmly.
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on
the light pan. Twist clockwise till lock.
Reinstall the screw which was just
removed. Tighten all screws securely.
Note: If you don’t want to install the fan
with LED light, go to step 19 for blanking
plate installation.
Isolate the quick connects with electrical
tape.
Attach blanking plate by locating dimples
in light pan with grooves on the blanking
plate and twist clockwise until tight.
Note: Do not install LED light fixture if
use blanking plate.
Attach the light shade by locating dimples
in light pan with grooves on the light
shade and twist clockwise until tight.
Install LED Light Fixture Install Blanking Plate
LED light fixture