Instructions / Assembly

3
© 2015 Monte Carlo Fan Company
9/1/2015
1 2 3
4 5 6
ON
OFF
ON
OFF
Before you begin installing the fan, Switch
power off at Service panel and lock
service disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be locked,
securely fasten a warning device, such
as a tag, to the service panel.
Use AC 120V/60HZ power supply
only.
Before installing this fan makes sure the
outlet box is properly installed to the
house structure. Ensure the outlet box is
securely fastened by at least two points
to a structural ceiling member (a loose
box will cause the fan to wobble).
To reduce the risk of fire, electric shock,
or personal injury, mount to outlet box or
supporting system acceptable for fan
support.
(Mounting must support at least 35 lbs.)
Remove the screw which on the round
hole of top plate on motor assembly and
partially loosen the other 3 screws
located at slotted holes. Keep screw.
Remove the motor assembly from
mounting plate by turning
counterclockwise.
Use metal outlet box suitable for fan
support and use only the screws provided
with the outlet box (must support 35
lbs). Remove the two outlet box screws
provided with the box, aligning the holes
of the mounting bracket with the holes of
the outlet box. Reinstall the 2 outlet box
screws securely.
For Canadian installation and for USA fan
and light kit combinations over 35 lbs, in
both flush and downrod modes the safety
cable must be installed into the house
structure beams using 3” lag screws,
washers and lock washers provided.
Note
: If Installing The Secondary Support
Safety Cable in the U.S., Do Not Remove
Knockouts In The Outlet Box.
Lift motor assembly up, attach motor
assembly onto mounting plate, aligning
the keyhole slots on the top plate of
motor assembly with the preassembled
screws on mounting plate. Twist
clockwise till lock. Reinstall the screw
which is removed in step 3. Tighten all
screws securely.
Ceiling
2˝ x 4˝
Ceiling
Joists
Outlet
Box
SAFETY CABLE INSTALLATION
Set screws
Screw
Mounting plate
Lag screw
Lock washer
Safety
cable
Washer
Safety
cable
Screw/ Washers
/Spring Washers
Ceiling joist
Outlet Box
Mounting
plate