Owner’s Guide and Installation Manual 5ED56XXD-L Series Fan UL Model No. : AC-556LF5800OD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: MODEL NUMBER: RETAILER ADDRESS: To register your fixture, please visit our website www.montecarlofans.com 12.38kgs 27.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70-1999), including fire-rated construction. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.
2 3 Before installing this fan mak e sure the outlet box is properly installed to the house structure. To reduce the risk of fire, electric shock, or per sonal injury, mount to outlet bo x or supporting system acceptable for fan support. (Mounting must support at least 35 lbs.) Use metal outlet box suitable for fan support (must support 35 lbs).
10 11 Safety cable installation 12 safety cable lag screw safety cable washer 3” lag screw Make wire connections to power source using wire nuts provided. Make sure that no filiments are outside of the wirenut. After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet bo x.
19 20 21 Put plug from fan through hole in switch plate. Install switch plate b y placing over the 2 screws and twisting into place. Install screw removed and tighten all 3 screws securely. Push plug from fan and plug from switch plate together.Match the color strips on the plugs. 22 23 24 Loosen 2 screws and remove 1 screw from light pan. Save screw for later use. Plug white wire from fan to white wire from light kit. Then plug blue wire from fan to black wire from light kit.
Trouble Shooting If you have difficulty operating your new ceiling fan, it ma y be the result of incorrect assembly , installation, or wiring. In some cases, these installation errors ma y be mistaken for defects. If y ou experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or y ou are experiencing difficulty in installation, please call our Customer Service Center at the number printed on y our parts list insert sheet.
Jul.
