Installation Guide

ManualsBrandsMonte Carlo ManualsCeiling FansLight Cast Max 52 in. Roman Bronze Ceiling Fan

8/1/2013

Wiring

Warning:

Make sure main power is turned off before making

wiring.

Make wire connections as indicated. Connect Black, Blue

and Orange wire from fan to Black (Hot) wire from house.

Connect White wire from Fan to White (Neutral) wire from

house. Connect all green grounded wires from fan to

Grounded wire from House. Make sure that no ﬁlaments are

outside of the wire connectors. (Fig. 7)

For control of fan and light separately from wall location,

follow diagram as shown. (Fig. 7-1)

Note

: A professional electrician is recommended for this

type of installation.

Note

: Wrap each wire connector separately with electrical

tape as an extra safety measure.

Canopy Installation

Partially loosen 2 of the set screws on mounting bracket

corresponding to the slotted holes on the canopy upper ring.

Remove the other 2 set screws. Save screws.

Raise canopy to mounting bracket, aligning loosened screws

in mounting bracket with slotted holes in canopy. Twist

canopy to lock. Reinstall screws (with washers) that were

previously removed and then tighten all screw securely. (Fig.

8, Fig. 8-1)

Fig. 7

Fig. 8

Mounting bracket

Fig. 8-1

Wall Switch

White

Black

Power

Line

Blue

Grounded/

Green

Canopy

Set screws

Canopy

Set screws

Downrod mount

Flush mount

電容器

Orange

Power supply

Black

white

Grounding/Green

Fan

Light

Blue

Black

Wall controller

Wiring Option with Wall Controller

Fig. 7-1

Orange