Owner’s Guide and Installation Manual 5WF52XXD-L Series Fan UL Model No. : AC-552OD Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: MODEL NUMBER: RETAILER ADDRESS: To register your fixture, please visit our website www.montecarlofans.com 8.4 kgs 18.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70-1999), including fire-rated construction. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.
2 3 Before you begin installing the fan, S witch power off at Service panel and lock service dis connecting means to prevent power from being switched on accidentally. When the service dis connecting means cannot be lock ed, securely fasten a prominent warning device, such as a tag, to the service panel. Before installing this fan mak e sure the outlet bo x is properly installed to the house structure.
10 11 12 Connect black and blue wire from fan to Black or (Hot) wire from house. Connect White wire from F an to White (Neutral) wire from house. Connect Ground leads from mounting bracket and downrod to Ground lead from house. Refer to Safety Tips section of manual. Make wire connections to power source using wire nuts provided. Make sure that no filiments are out side of the wirenut.
19 20 21 Locate blue and white wire from the fan marked “For light kit”. Connect blue from fan to black from light and white from fan to white from light b y pushing connectors together. Attach switch cap to fan b y lining up 3 screw holes and twisting cap clock wise. Then tighen the 3 screws. Install 2 x 13 w att (E27) based fluorescent bulbs.(Bulbs Included) 22 Push glass up into fitter and hand tighten the 3 screws to hold in place.
TROUBLE SHOOTING If you have difficulty operating your new ceiling fan, it ma y be the result of incorrect assembly , installation, or wiring. In some cases, these installation errors ma y be mistaken for defects. If y ou experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or y ou are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.
Jun.