Instructions / Assembly

Please contact 1-800-446-9092 for further assistance.

MONTEAUX LIGHTING

™

Installation

Attaching the mounting unit to the

junction box

 Attach the mounting unit (AA) to the junction box (not

included) with the mounting screws (BB).

Making the electrical connections

 Connect the copper wire from the light fixture (A) to the

mounting unit (AA) by securing it with the preinstalled

ground screw.

 Connect the black to black (power), the white to white

(neutral) and copper wire to ground wire with the wire

nuts (CC) and secure with electrical tape (not included).

NOTE: If the wires from the fixture are the same color,

attach the side with markings or letters to the black

(positive) wire and the other to the white (neutral) wire.

NOTE: The pre-installed support screws on the

mounting unit (AA) should protrude out away from the

junction box.

Securing the light fixture

 Secure the light fixture (A) to the junction box by placing it

over the pre-installed support screws on the mounting unit

(AA) and securing it with the cap nuts (DD).

 Screw the rods (C) into the light fixture (A).