Instructions / Assembly

InstructIon manual

TOOLS REQUIRED fOR ASSEmBLy

10 mm and 14 mm Sockets

Extension Ratchet

CABINET HANDLE INSTALLATION

NOTE: Assemble the handle rst to make it easier

to move the cabinet.

Position the handle over the holes in the cabinet

and attach with the M6 x 12 mm hex bolts provided.

Tighten securely using a 10 mm socket.

CASTER INSTALLATION

CAUTION: Two or more people are required to lay

down or stand up the cabinet. Use the side handles

for assistance. DO NOT stand in front of or behind

the product during this process. Lock drawers before

proceeding.

Carefully lay the cabinet on its back, with a soft mat

underneath for protection.

Position the two swivel casters on the cabinet

bottom, on the same side as the handle. Insert four

M8 x 20 mm hex bolts through washers, then through

each caster and into the bottom of the cabinet. Tighten

securely.

Repeat for the two rigid casters on the other side

of the cabinet.

CHEST AND CABINET CONNECTION

Place the chest on the cabinet. Attach the connectors

to the chest, making sure the hook head snaps in the

square hole on the back of the chest. Fasten the

M6 x 12 hex bolts to the cabinet.