OWNER'S MANUAL 2-DOOR BASE CABINET WITH WORKTOP MG30242BC www.montezumastorage.
LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. We are here to ensure that your life is organized. Thank you for your purchase of this Montezuma 2-Door Base Cabinet. ATTENTION TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS PRODUCT FOR THE FIRST TIME.
SPECIFICATIONS 2-DOOR BASE CABINET WITH WORK TOP MG30242BC BASE CABINET OVERALL DIMENSIONS: 30-1/2" W x 24" D x 34-3/4" H (77.6 cm W x 61 cm D x 88.1 cm H) NET WEIGHT: 77.2 lb (35 kg) MAXIMUM SHELF WEIGHT CAPACITY: 100 lb (45 kg) * Dimensions do not include adjustable feet. STAINLESS STEEL WORKTOP OVERALL DIMENSIONS: 30-1/2" W x 24" D x 1" H (77.6 cm W x 61 cm D x 2.7 cm H) NET WEIGHT: 25.4 lb (11.5 kg) Stainless steel worktop included. Galvanized steel worktops also available. Visit www.montezumastorage.
PARTS LIST 1 2 12 xxx 2 11 The keys are taped inside the cabinet.
1 20 3 M6 x 16 Hex Socket Head Screw 8 for attaching worktop 11 for attaching bottom panel Washer For attaching to top of cabinet 1 for attaching unit to other units For use with M6 x 65 Hex Tapping Screw 3 2 1 M6 x 65 Hex Tapping Screw End Cover xxx Stainless Steel Worktop Lock and Key For securing unit to the wall For covering holes for attaching to other units, if not in use 4 4 1 Adjustable Feet Shelf Support Shelf For attaching to bottom panel For supporting adjustable shelf F
ASSEMBLY Visit www.montezumastorage.com to watch the how-to video. Carefully separate the front and back panels, allowing the side panels to unfold completely. Turn the unit upside down Insert the lip of the bottom panel into the slot in the back of the cabinet, then tilt the bottom panel down. Make sure the holes are aligned.
Attach the bottom panel using eleven M6 x 16 hex socket head screws. Screw the four adjustable feet into the cabinet bottom. Turn the cabinet upright.
To add a worktop, attach a bracket on either side of the worktop using two M6 x 16 hex socket head screws per bracket. Make sure the lip of each bracket is secured under the lip of the cabinet. Attach the worktop to the front and back of the cabinet using four M6 x 16 hex socket head screws. Note the correct holes in the cabinet.
Insert four shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports. If you have purchased a pegboard back wall, posts and wall cabinet, refer to the owner's manual for the pegboard back wall and posts for how to install them on your base cabinet. WARNING: DO NOT STACK A 2-DOOR BASE CABINET ON TOP OF ANOTHER CABINET.
INSTALLATION If you have purchased other units, assemble them now, then put all units together to build your garage. For a better appearance, attach units together using a M6 x 16 hex socket head screw and M6 hex flange nut. Holes are located at the top front side of each unit.
Hide holes on the exterior ends of the units with the supplied end covers, if necessary.
For safety, secure the tops of the each unit to the wall using three M6 x 65 hex tapping screws and washers. For best results, mount to studs or other solid surfaces. Do not mount to drywall as it will not support the required weight and poses a danger if mounted incorrectly.
MAINTENANCE Periodically clean the door fronts, trim, and other surfaces with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY Use two people to move the units into place. Failure to do so can result in back or other injuries. DO NOT leave children unattended near the garage storage system. DO NOT stand on this product or lean on the work surface. DO NOT alter this product in any manner.
This product is warranted to be free from defects in materials and workmanship for a period of five (5) years from the date of original purchase. If this product is defective, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us unless we send you written instructions for return.
Manufactured by: QUALITY CRAFT Romeoville, IL, USA 60446 service@montezumastorage.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.