OWNER'S MANUAL 2-DOOR STACKING CABINET MG3024STBC www.montezumastorage.
LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. We are here to ensure that your life is organized. Thank you for your purchase of this Montezuma 2-Door Stacking Cabinet. ATTENTION TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS PRODUCT FOR THE FIRST TIME.
SPECIFICATIONS 2-DOOR STACKING CABINET MG3024STBC OVERALL DIMENSIONS: 30-1/2" W x 24" D x 40" H (77.6 cm W x 61 cm D x 101.6 cm H) NET WEIGHT: 63.9 lb (29 kg) MAXIMUM SHELF WEIGHT CAPACITY: 100 lb (45 kg) * Dimensions do not include adjustable feet. The stacking cabinet can also accept a worktop to create a higher base cabinet. Visit www.montezumastorage.com for more information.
PARTS LIST 1 1 xxx 11 2 The keys are taped inside the cabinet.
20 4 M6 x 16 Hex Socket Head Screw 8 for attaching top panel (top cabinet in stack only) M6 x 35 Hex Flange Bolt 1 for attaching unit to other units For securing the top and bottom cabinets in a stack together 3 3 2 Washer M6 x 65 Hex Tapping Screw End Cover 11 for attaching bottom panel For use with M6 x 65 Hex Tapping Screw For securing unit to the wall For covering holes for attaching to other units, if not in use 4 1 Lock and Key Adjustable Feet Shelf For securing your valuables Fo
ASSEMBLY Visit www.montezumastorage.com to watch the how-to video. ASSEMBLING THE BOTTOM CABINET IN THE STACK Choose one cabinet to be the bottom cabinet in your stack. Carefully separate the front and back panels, allowing the side panels to unfold completely. Make sure the unit is upside down.
Insert the lip of the bottom panel into the slot in the back of the cabinet, then tilt the bottom panel down. Make sure the holes are aligned. Front Back Attach the bottom panel using eleven M6 x 16 hex socket head screws.
Screw the four adjustable feet into the cabinet bottom. Turn the cabinet back to the upright position. Place the top panel on the cabinet, but do not attach.
Insert four shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports.
ASSEMBLING THE TOP CABINET IN THE STACK Choose another cabinet to be the top cabinet in your stack. Carefully separate the front and back panels, allowing the side panels to unfold completely. Make sure the cabinet is upside down.
Insert the lip of the bottom panel into the slot in the back of the cabinet, then tilt the bottom panel down. Make sure the holes are aligned. Front Back Attach the bottom panel using eleven M6 x 16 hex socket head screws.
Attach the top panel to the cabinet using eight M6 x 16 hex socket head screws.
Insert four shelf supports inside the cabinet at the desired height. Place the shelf on the shelf supports.
STACKING CABINETS Stack your top cabinet on top of your bottom cabinet. Open the doors on the top cabinet to access the bolt holes. Make sure the holes in the top and bottom cabinet are aligned. Attach your top cabinet to your bottom cabinet using four M6 x 35 hex flange bolts.
INSTALLATION If you have purchased other units, assemble them now, then put all units together to build your garage. For a better appearance, attach units together using a M6 x 16 hex socket head screw and M6 hex flange nut. Holes are located at the top front side of each unit.
Hide holes on the exterior ends of the units with the supplied end covers, if necessary.
For safety, secure the tops of the each unit to the wall using three M6 x 65 hex tapping screws and washers. For best results, mount to studs or other solid surfaces. Do not mount to drywall as it will not support the required weight and poses a danger if mounted incorrectly.
MAINTENANCE Periodically clean the door fronts, trim, and other surfaces with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY Use two people to move the units into place. Failure to do so can result in back or other injuries. DO NOT leave children unattended near the garage storage system. DO NOT stand or lean on this product. DO NOT alter this product in any manner.
This product is warranted to be free from defects in materials and workmanship for a period of five (5) years from the date of original purchase. If this product is defective, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us unless we send you written instructions for return.
Manufactured by: QUALITY CRAFT Romeoville, IL, USA 60446 service@montezumastorage.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.
