Instructions / Assembly

7
HANDLE INSTALLATION
NOTE: Assemble the handles first to make it
easier to move the cabinet.
Position the handles over the holes in the
cabinet and attach with the M6 x 12 mm
hex bolts provided. Tighten securely using a
10 mm socket.
CASTER INSTALLATION
CAUTION: Two or more people are required
to lay down or stand up the cabinet. Use the
side handles for assistance. DO NOT stand
in front of or behind the product during this
process. Lock drawers before proceeding.
Carefully lay the cabinet on its back, with a
soft mat underneath for protection.
Position the two swivel casters on the
cabinet bottom, on either the left or right
side. Insert four M8 x 25 mm hex bolts
through washers, then through each caster
and into the bottom of the cabinet. Tighten
securely using a 14 mm socket.
Repeat for the two rigid casters on the other
side of the cabinet.
CORD WRAP INSTALLATION
Position the cord wrap over the holes in the
cabinet. Attach with the M6 x 12 mm Phillips
head bolts provided. Tighten securely.