OWNER'S MANUAL 72" X 20" TOOL CHEST AND CABINET M722010CH/M722016TC www.montezumastorage.
LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. We are here to ensure that your life is organized. Thank you for your purchase of this Montezuma Tool Chest and Cabinet. ATTENTION TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS PRODUCT FOR THE FIRST TIME.
SPECIFICATIONS MAXIMUM PRODUCT WEIGHT (INCLUDING CONTENTS): 3,300 lb (1,497 kg) MAXIMUM DRAWER WEIGHT: 150 lb (68 kg) POWER STRIP MODEL: LTS-04C/CH-04F SURGE PROTECTIVE DEVICES RATING: 120 V AC 15 A 60 Hz 1875 W USB: TOTAL 2.1 A – Check your device for compatibility USB O/P: IT EQUIPMENT ONLY VPR: 500-1000 V (L-N) TYPE 3 SPD CONFORMS TO UL STD. NO 1363 AND ANSI/UL STD. NO. 1449 CERTIFIED TO CSA STD. C22.2 NO.
72" x 20" 10-DRAWER TOOL CHEST M722010CH OVERALL DIMENSIONS: 72-5/8" W x 20-1/8" D x 25" H (184.6 cm W x 51 cm D x 63.5 cm H) NET WEIGHT: 233.69 lb (106 kg) A B INSIDE TILL/DRAWER DIMENSIONS: REF DIMENSIONS 4 QTY A 69-5/8" W x 18-7/8" D x 8-1/2" H (176.9 cm W x 47.9 cm D x 21.7 cm H) 1 B 31-7/8" W x 17-1/4" D x 2-3/8" H (80.9 cm W x 43.8 cm D x 5.9 cm H) 4 C 15-3/4" W x 17-1/4" D x 2-3/8" H (39.9 cm W x 43.8 cm D x 5.9 cm H) 4 D 15-3/4" W x 17-1/4" D x 5-1/4" H (39.9 cm W x 43.8 cm D x 13.
72" x 20" 16-DRAWER TOOL CABINET M722016TC OVERALL DIMENSIONS: 72-5/8" W x 20-1/8" D x 41-1/8" H (184.6 cm W x 51 cm D x 104.5 cm H) NET WEIGHT: 425.49 lb (193 kg) A B C D INSIDE DRAWER DIMENSIONS: REF DIMENSIONS QTY A 50-1/4" W x 17-1/4" D x 5-1/8" H (127.5 cm W x 43.8 cm D x 12.9 cm H) 1 B 31-7/8" W x 17-1/4" D x 2-3/8" H (80.9 cm W x 43.8 cm D x 5.9 cm H) 3 C 31-7/8" W x 17-1/4" D x 5-1/4" H (80.9 cm W x 43.8 cm D x 13.4 cm H) 1 D 31-7/8" W x 17-1/4" D x 8-1/4" H (80.9 cm W x 43.
xxx CHEST PARTS LIST The keys are taped to the top storage area of the chest.
REF DESCRIPTION 1 PART NUMBER QTY Chest Handle 301883 1 2 M4 x 5 mm Phillips Head Bolt 320060 2 3 Gas Strut 303203 2 4 Grommet 314027 2 5 Power Strip 333059 1 6 Till Liner 552107 1 7 Lock and Key (1201–1204) 304166 2 8 Drawer Liner 552108 4 9 Drawer Liner 552109 6 10 Slide Set 300212–300213 10 11 Connector 240091 2 12 M6 x 12 mm Hex Bolt 321051 4 To order replacement parts, email service@qualitycraft.
xxx CABINET PARTS LIST They keys are taped to the top of the caster carton, which is placed in the bottom right drawer of the cabinet.
REF DESCRIPTION PART NUMBER QTY Work Top 572019 1 1 2 Power Strip 333059 1 3 Grommet 314027 1 4 Cabinet Handle 306142 2 5 M6 x 12 mm Hex Bolt 321051 8 6 M6 x 12 mm Phillips Head Bolt 320323 2 7 Cord Wrap 8 Slide Set 236870 1 300212–300213 20 9 Swivel Caster 302231 4 10 Washer 324002 24 11 M8 x 25 mm Hex Bolt 321047 24 12 Drawer Liner 552109 10 13 Drawer Liner 552108 5 14 Drawer Liner 552110 1 15 Rigid Caster 302232 2 16 Lock and Key (1201–1204)
HANDLE INSTALLATION NOTE: Assemble the handles first to make it easier to move the cabinet. Position the handles over the holes in the cabinet and attach with the M6 x 12 mm hex bolts provided. Tighten securely using a 10 mm socket. CORD WRAP INSTALLATION Position the cord wrap over the holes in the cabinet. Attach with the M6 x 12 mm Phillips head bolts provided. Tighten securely.
CHEST AND CABINET CONNECTION CAUTION: Two or more people may be required to complete this step. NOTE: It is not required to remove the worktop attached to the cabinet. If you do want to remove the worktop, first remove the drawers, then unbolt the worktop. Place the chest on the cabinet. Attach the connectors to the chest, making sure the hook head snaps in the square hole on the back of the chest. Fasten the M6 x 12 mm hex bolts to the cabinet.
RAISE AND RELEASE DRAWER FRONTS These units are equipped with raise and release drawer fronts. To open, lift up on the drawer front while pulling towards you. To close, shut the drawer firmly until the latch engages. If the drawer does not stay closed, the hook may be bent, or it may be rubbing against the drawer slides. To fix this problem, lightly bend the hook until the drawer will engage in the slide. Lift DRAWER REMOVAL Pull the drawer out so that it’s almost fully extended.
MAINTENANCE Periodically clean the drawer fronts, trim, and other surfaces with mild detergent and water. Lubricate the casters with high quality bearing grease (annually/yearly). Lubricate the slides (twice a year) with a product like WD40 or other quality lubricant. This is especially important in low temperatures, which can cause the bearing to become stiff. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY RISK OF ELECTRIC SHOCK.
This product is warranted to be free from defects in materials and workmanship for a period of five (5) years from the date of original purchase. If this product is defective, email service@qualitycraft.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us unless we send you written instructions for return.
Manufactured by: QUALITY CRAFT Surrey, BC, Canada V3S 5N4 service@qualitycraft.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.
