OWNER'S MANUAL 4-BAY POWER TOOL ORGANIZER MPSO-4B www.montezumastorage.
LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. Keep your life organized with Montezuma. Thank you for your purchase of this Montezuma Power Tool Organizer. ATTENTION TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS PRODUCT FOR THE FIRST TIME. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS MAXIMUM WEIGHT FOR POWER TOOL BAYS: 5 lb (2.3 kg) MAXIMUM WEIGHT FOR TOP AND MIDDLE SHELVES: 20 lb (9.1 kg) OVERALL DIMENSIONS: 17-3/4" W x 9-1/2" D x 3-3/8" H (45 cm W x 24 cm D x 8.
PARTS LIST REF DESCRIPTION 1 Nut PART NUMBER QTY 122260 15 2 Bolt 122261 15 3 Self Tapping Screw 122262 4 4 Plastic Drywall Anchor 122263 4 To order replacement parts, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). Have the part number and quantity ready. Not all parts are covered under warranty. Those parts not covered can be purchased.
15 15 Nut Bolt For use with bolts For assembling the power tool organizer 4 4 Self Tapping Screw For attaching the power tool organizer to a wall or a pegboard Plastic Drywall Anchor For use with the self tapping screws 5
TOOLS REQUIRED Phillips head screwdriver Socket wrench Power drill Level ASSEMBLY Attach the two side panels to the bottom panel using two bolts and nuts per side. Note: the tabs on the front of the power tool slots should face down. Attach the two side panels to the middle shelf using two bolts and nuts per side. Note: the holes in the edge of the shelf should face forward.
Attach the two side panels to the top shelf using two bolts and nuts per side. Note: the flange on the top shelf should face downward. Position the support bar so the slot passes through the tab on the bottom shelf with the power tool slots. Secure the bar by lining up the hole at the top of the support bar with the corresponding hole on the middle shelf. The support bar should be positioned behind the front edge of the middle shelf. Secure using a bolt and nut.
INSTALLATION This organizer is built for 16" on center wall studs. Locate the wall studs and mark the locations of the four holes shown in the illustration. Use a level to make sure the organizer is straight. Pre-drill pilot holes into the wall studs. Secure the self-tapping screws into the marked locations, leaving enough room to position the organizer in place using the keyhole slots. Then tighten down the screws to secure the organizer in place.
1 This product is warranted to be free from defects in materials and workmanship for a period of one (1) year from the date of original purchase. If this product is defective, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us unless we send you written instructions for return.
Manufactured by: QUALITY CRAFT Romeoville, IL 60446 service@montezumastorage.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.
