Instructions / Assembly

6
A SSE M BLY
Install one of the leveling feet at the bottom of each adjustable leg section.
Slide each adjustable leg section onto a main leg section until you reach the desired
height. Take into consideration the thickness of the work top you will be using – you will
need to reduce the length of the leg by the thickness of your work top to hit your targeted
height. Make sure the length of each leg is the same.
Insert one cross brace so that it can be fastened together with the adjustable leg section
and main leg section at the desired height, making sure all holes are lined up. Use four (4)
nuts and bolts to secure the cross brace. Repeat to connect a second leg, which creates
one leg assembly.
Secure the leg assembly with another cross brace at the top of the legs using four (4)
bolts and nuts per leg.
Tighten all nuts and bolts.
Repeat to create the second leg assembly, which will form the other end of the workbench.