Instructions / Assembly

5
SMALL PARTS TRAY
The SB180DB includes a small parts tray. To remove, tip the tray upwards.
MAINTENANCE
Periodically clean the unit surfaces with mild detergent and water.
Auto wax can be used on painted steel toolboxes to preserve the unit’s luster finish and
protect against scratches. Apply the wax as you would to a car.
Lubricate the slides (twice a year) with a product like WD40 or other quality lubricant.
This is especially important in low temperatures, which can cause the bearing to become
stiff.
Grease and oil can be removed with most standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
SIDE HANDLE INSTALLATION
The side handles need to be installed. Attach each side handle using the screws and
nuts provided. Refer to the illustration below that matches your model.
SB360DB SB180DB
5
6
7