OWNER'S MANUAL 2-DOOR TALL CABINET MG3024TBC www.montezumastorage.
LIFE ORGANIZED Montezuma is committed to helping you succeed in both your work and personal life by being organized, prepared and equipped with the right tools, gear and home supplies at your finger tips. We are here to ensure that your life is organized. Thank you for your purchase of this Montezuma 2-Door Tall Cabinet. ATTENTION TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE USING THIS PRODUCT FOR THE FIRST TIME.
SPECIFICATIONS 2-DOOR TALL CABINET MG3024TBC OVERALL DIMENSIONS: 30-1/2" W x 24" D x 80" H (77.6 cm W x 61 cm D x 203.1 cm H) NET WEIGHT: 119.1 lb (54 kg) MAXIMUM SHELF WEIGHT CAPACITY: 100 lb (45 kg) * Dimensions do not include adjustable feet.
xxx PARTS LIST The keys are taped inside the cabinet.
REF DESCRIPTION PART NUMBER QTY 1 M6 x 16 Hex Socket Head Screw 320327 52 2 Washer 324050 3 3 M6 x 65 Hex Tapping Screw 320316 3 4 Bracket 234992 2 5 Shelf 118986 3 6 End Cover 314195 8 7 Shelf Support 226078 12 8 Adjustable Feet 110068 4 9 M4 x 12 Phillips Head Bolt 320202 16 10 Lock and Key 304178 1 11 Door Pull 301915 6 12 M6 Hex Flange Nut 323085 5 13 Stiffener 234991 2 14 Magnet 312033 2 To order replacement parts, email service@montezumastorag
52 M6 x 16 Hex Socket Head Screw 3 8 for assembling each side panel (total 16) 4 for attaching bottom panel 4 for attaching top panel 15 for attaching back panels 8 for securing front corners 4 for assembling the doors 1 for attaching unit to other units Washer For use with M6 x 65 Hex Tapping Screw 3 2 3 M6 x 65 Hex Tapping Screw Bracket Shelf For securing unit to the wall For connecting side panels together For placing at desired height 8 12 4 For covering holes for attaching to other uni
5 2 2 Stiffener Magnet For connecting side panels together Pre-installed M6 Hex Flange Nut For use with M6 x 16 hex Socket Head Screw when assembling the doors and attaching to other units For keeping doors closed 7
ASSEMBLY Visit www.montezumastorage.com to watch the how-to video. NOTE: To assemble this unit, you will require a screwdriver for M4 x 12 Phillips head bolts. Assemble the side panels. 1. Insert a stiffener to connect two panels together on one side. 2. On the same side as the stiffener, attach the two panels together using six M6 x 16 hex socket head screws. 3. On the other side of the panels, attach a bracket using two M6 x 16 hex socket head screws. Repeat for the other two side panels.
Place assembled side panels on their side with stiffener sides facing in. Attach the bottom panel to the side panels using four M6 x 16 hex socket head screws. Screw the four adjustable feet into the cabinet bottom.
Attach the top panel using four M6 x 16 hex socket head screws.
Place the four back panels on the back of the cabinet, starting at the top and working down. Attach using fifteen M6 x 16 hex socket head screws.
Secure the front corners of the cabinet with eight M6 x 16 hex socket head screws.
Assemble the doors. NOTE: Panel B connects to Panel D, which has a doorstop at the bottom. Panel A connects to panel C, which does not have a doorstop at the bottom. 1. Insert a middle door pull to connect two panels together on one side. 2. Attach the two panels together using four M6 x 16 hex socket head screws and M6 hex flange nuts. Repeat for the other door.
Install the door with the doorstop on the left hand side. Install the door with the lock on the right hand side, with the lock on the top. 1. Partially screw eight M4 x 12 Phillips head bolts into the cabinet. Hang the door on the screws. 2. Tighten the screws. Repeat for the other door.
INSTALLATION If you have purchased other units, assemble them now, then put all units together to build your garage. For a better appearance, attach units together using a M6 x 16 hex socket head screw and M6 hex flange nut. Holes are located at the top front side of each unit.
Hide holes on the exterior ends of the units with the supplied end covers, if necessary.
For safety, secure the tops of the each unit to the wall using three M6 x 65 hex tapping screws and washers. For best results, mount to studs or other solid surfaces. Do not mount to drywall as it will not support the required weight and poses a danger if mounted incorrectly.
MAINTENANCE Periodically clean the door fronts, trim, and other surfaces with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY Use two people to move the units into place. Failure to do so can result in back or other injuries. DO NOT leave children unattended near the garage storage system. DO NOT stand on this product or lean on the work surface. DO NOT alter this product in any manner.
This product is warranted to be free from defects in materials and workmanship for a period of five (5) years from the date of original purchase. If this product is defective, email service@montezumastorage.com or call 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or to us unless we send you written instructions for return.
Manufactured by: QUALITY CRAFT Surrey, BC, Canada V3S 5N4 service@montezumastorage.com 1-800-459-4409 (Monday to Friday, 8:00 am–4:30 pm, CST) Made in China www.montezumastorage.
