Use and Care Manual

WWW.RSIWW.COM

15 of 43

B-3

B-5

B-3

F-7

G-1

G-2

F-1

W-1

B-5

NOTE: VIEWS FROM OUTSIDE UNDER GUTTER.

NOTE: The bottom of B-3 connector extends past the edges of side and corner

profiles. B-3 connector sits over B-5 connector. Secure all with 2-SC bolts.

The gutters are secured together using B-5 connectors and attached to side

profiles using B-3 connectors on the outside of the greenhouse. The B-3

connector uses the T-bolt in the center hole of B-5 connectors at seams.

Loosen and slide T-bolts to line up with connectors making sure the seams

line up and the gutters remain straight.

2.6A

Begin at the four seams and arrange T-bolts so middle bolt

is centered. Fit B-5 connector onto gutter and hold in place

using the two S-2C end bolts.

2.6B

Place B-3 connector on center T-bolt on gutter.

Insert T-bolt assembly through slot in B-3 connector to secure as shown.

2.6c

B-5

Connector QTY

S-7 7

Connector

QTY

B-3 7

S-2C 26

Connector

QTY

B-5