Monticello Made in the USA 8’ x 20’ Greenhouse Assembly Instructions 160701V WA RRAN TY Customer Service: (877) 373-3078 Email: customerservice@rsiww.
Thank you for choosing the Monticello Greenhouse Program Thank You for your Purchase We want to thank you for your purchase of the Monticello Greenhouse. We appreciate your support of our American Made Greenhouses. The Monticello is designed for the average homeowner; no special degrees are needed. The time to assemble depends on the weather, skills, options, and number of helpers you have in the process.
Merci d’avoir choisi le programme à effet de serre Monticello Merci pour votre achat Nous tenons à vous remercier pour votre achat de l’ effet de serre Monticello. Nous apprécions votre soutien de nos Made Greenhouses américains. Le Monticello est conçu pour le propriétaire moyen; pas degrés spéciaux sont nécessaires. Le temps d’assembler dépend du temps, les compétences, les options et le nombre d’ aides que vous avez dans le processus.
Gracias por elegir el Programa de efecto invernadero Monticello Gracias por su compra Queremos darle las gracias por su compra del invernadero Monticello. Apreciamos su apoyo de nuestros Made invernaderos estadounidenses. El Monticello está diseñado para el dueño de casa promedio; no son necesarios grados especiales. La hora de montar depende del tiempo, habilidades, opciones, y el número de ayudantes que tiene en el proceso.
MONTICELLO Limited Warranty/ Liability Snow Load & Wind Load Warranty & Liability The Monticello Greenhouse described in this manual is designed for and limited to Riverstone Industries standard wind and snow load which is based on a continuously heated greenhouse. Standard loads are: Wind Load = 113 MPH/ 1 second gust (52m/sec); 65 mph continuous winds, Snow load of 24 lbs. sq ft.
MONTICELLO Garantie/Responsabilité Charge de neige et Charge Vent Garantie et responsabilité L’ effet de serre Monticello décrit dans ce manuel est conçu et limité à Riverstone Industries vent standard et la charge de neige qui est basée sur une serre chauffée en continu. charges standard sont : Wind Load = 113 MPH / 1 seconde rafale ( 52m/s ); 65 mph vents continus, la charge de neige de 24 lbs. sq ft.
Monticello Limited Garantía/Responsabilidad Carga de nieve y viento de carga Garantía y Responsabilidad El efecto invernadero Monticello descrito en este manual está diseñado y limitado a Riverstone Industrias viento estándar y carga de nieve que se basa en un invernadero con calefacción continua. cargas estándar son: El viento carga = 113 MPH/1 segundo ráfaga ( 52 m/seg ); 65 mph vientos continuos, carga de nieve de 24 lbs. sq ft .
Introduction Thank you for purchasing the Mojave Edition MonticelloTM Greenhouse. The Monticello line is proudly made in the USA by a leading commercial greenhouse maker using the same professional grade materials and design. The frame is constructed with the highest quality extruded aluminum with lead free powder-coated paint. The panels are professional grade 8mm twin wall polycarbonate selected for their insulation and durability.
Introduction Nous vous remercions d’avoir acheté le Greenhouse Mojave Édition MonticelloTM. La ligne Monticello est fièrement fabriqué aux Etats-Unis par un fabricant leader de serre commerciale en utilisant les mêmes matériaux de qualité professionnelle et de design. Le châssis est construit avec l’ aluminium extrudé haute qualité avec de la peinture par poudrage sans plomb. Les panneaux sont de qualité professionnelle 8mm polycarbonate double paroi sélectionnés pour leur isolation et durabilité.
Introducción Gracias por adquirir el Invernadero de Mojave Edición MonticelloTM usted. La línea de Monticello se hace orgulloso en los EE.UU. por un fabricante de invernadero comercial que lleva utilizando los mismos materiales de calidad profesional y de diseño. El bastidor está construido con la más alta calidad de aluminio extruido con pintura con pintura en polvo libre de plomo. Los paneles son de grado profesional de 8 mm de policarbonato de doble pared seleccionados por su aislamiento y durabilidad.
Safety Advice Table of Contents • The greenhouse must be positioned and fixed on a flat level surface. • Dispose of all plastic bags safely. Keep them out of the reach of small children. • Keep children and pets away from the assembly area until the work is completed. • Always wear work shoes, gloves and safety goggles when working. • Some of the parts have sharp edges and burs. Use extreme caution when handling. • Do not lean against or push the greenhouse during assembly.
Conseils de sécurité Table des Matières • La serre doit être positionné et fixé sur un plat surface plane. • Jetez tous les sacs en plastique en toute sécurité. Gardez-les hors de la la portée des petits enfants. • Gardez les enfants et les animaux loin de la zone d’assemblage jusqu’à ce que le travail est terminé. • Toujours porter des chaussures de travail, des gants et des lunettes de sécurité lors du travail. • Certaines pièces ont des arêtes vives et des fraises.
Consejos de seguridad Tabla de contenido • El invernadero debe estar colocado y fijado sobre una superficie plana superficie nivelada. • Deseche todas las bolsas de plástico de forma segura. Mantenerlos fuera de la alcance de los niños. • Mantenga a los niños y mascotas lejos de la zona de montaje hasta el trabajo se ha completado. • Siempre use zapatos de trabajo, guantes y gafas de seguridad cuando trabajan. • Algunas de las piezas tienen bordes afilados y las fresas. Tenga mucho precaución al manejar.
Constructing a Wood Platform IMPORTANT: It is very important to begin with a level surface. Check your foundation to ensure it is level at every point. If you are not building on a wood deck, we recommend constructing a wood platform so you can properly secure the greenhouse. You must assure your foundation is square and level before beginning assembly. After choosing a location, proper preparation of the site is essential. The site must be level.
La construction d’une plate-forme en bois IMPORTANT : Il est très important de commencer par une surface plane . Vérifiez votre fondation pour assurer qu’il est de niveau à chaque point. Si vous n’êtes pas la construction sur une terrasse en bois , nous vous recommandons de construire une plate-forme de bois afin que vous puissiez correctement sécuriser la serre . Vous devez assurer votre fondation est carré et de niveau avant de commencer l’assemblage .
La construcción de una plataforma de madera IMPORTANTE : Es muy importante comenzar con una superficie nivelada. Compruebe su fundación para asegurar que esté en cada nivel punto. Si no está construyendo en una cubierta de madera, se recomienda la construcción de una plataforma de madera para que pueda adecuadamente asegurar el efecto invernadero. Usted debe asegurarse de que su fundación es cuadrada y nivelada antes de comenzar el montaje.
List of Parts WARNING: Profiles with cut edges and/or drilled holes are sharp. Use extreme caution when handling. The greenhouse is shipped in multiple cartons. These cartons are heavy. Use care when lifting them. Some parts have sharp edges. Use extreme caution when handling. Wear proper safety gear including work shoes, gloves and safety goggles. Keep children and pets away until assembly is complete. Finish assembling the roof in one session.
List of Parts (continued) Profile PT# QTY Profile Steps 4 QTY Steps R-1E 3 7 W-1 42 2, 3, 4 W-2 4 8 W-3 4 4, 5 W-4 2 6 W-5 2 4 W-6 4 10 PT# QTY Steps G-4 4 8 G-4E 6 8 PT# QTY Steps V-3 4 9 48 ½” 23” F-6 PT# 5, 6 56” 24” x 57” F-7 8 2, 3, 4, 5, 6 72” F-8 4 5, 6 24” x 32 ¼” 23” F-10 2 24” x 15 ½” 3 25 ½” 24” x 31 ¼” G-1 4 2, 4 48 ½” 24” x 18½” G-2 8 2, 4 24” x 34” 50½” P-1A 4 1 P-1B 4 1 Trim Plates 49 ¾” 48 ½” 52⅛” P-2A 3 1 P-
List of Parts (continued) Connectors WARNING: Use extreme caution when handling panels with cut edges. The corners are sharp.
List of Parts (continued) Hardware Gutter Drain PT# QTY Steps S-1 16 9 Brace S-2C 415 1-8,10-12 S-2A 10 5 S-2B 2 5 S-2D 2 5 S-4 95 11 S-5A 4 7 S-5B 4 8,12 S-5D 4 8,12 S-6 8 9 S-7 Ground Anchors Included Tools 415 1-8, 10, 11 S-8A 8 5 S-9 38 10 S-10 4 10 Wrench Included Tools 5’ Bungee Cord 19 of 75 QTY Steps G-3 4 8 PT# QTY Steps B-9 4 8 PT# QTY Steps A-1 10 11 A-2 10 11 PT# QTY Steps S-10 1 1-11 T-2 1 1-10 PT# QTY Steps T-3
Using T-Bolts + S-7 2x’s = S-2C S-7A tical profiles you will place a nut on the T-bolt, hold the t in place and push the T-bolt (with nut attached loosly) gh slot. The T-bolt will lock into place when nut is tightened. Visit us at WWW.RSIWW.com/AssemblyQuestions for key assembly images and helpful tips. 20 of 75 WWW.RSIWW.
Icon Key Key Icon clave icono x4 Repeat specified number of times. Répétition nombre de fois spécifié. Repita el número especificado de veces. (1.3A-1.3E) X 8 Repeat specified steps, specified number of times. Répétez les étapes indiquées, le nombre de fois spécifié. Repetir los pasos especificados, el número de veces especificado. View from inside. Vue de l’intérieur. Vista desde el interior. View from outside. Vue depuis l’extérieur. Ver desde fuera. Requires two people and ladder.
Piece is square if measurements from opposite corners are equal. Piece est carré si des mesures à partir des coins opposés sont égaux . Pieza es cuadrada si las mediciones de ángulos opuestos son iguales . View from below. Vue de dessous. Ver desde abajo. View from above. Vue d’en haut. Vista desde arriba. Apply aluminum tape. Appliquer du ruban d’aluminium. Aplicar cinta de aluminio. View from side. Voir d’un côté. Vista desde el lado.
Assemble Base 1.1A IMPORTANT: Make sure the base fits properly on your foundation. If not, stop and fix your foundation. P-1A P-1B P-2B P-2B P-2B P-1A BACK P-1B FRONT P-1B P-1A 1.1B P-2A P-1A P-1B 1.1B 1.1B 1.1B P-1A 1.1B P-1B P-2B P-2B P-2B x6 S-4 P-1A BACK IMPORTANT: Position P-2A and P-2B profiles at back of greenhouse. FRONT P-1B P-2A P-2A B-8 P-1A P-1B 1.1B 1.1B P-1B P-1A P-2A 1.1B P-2A P-2A Profile 50½” WWW.RSIWW.
1.2A S-2C B-8 B-8 S-7 B-8 x4 B-5 P-2A P-1A B-5 B-8 B-5 B-5 P-2A B-5 BACK P-2A P-1B P-1B P-1A B-8 B-8 B-5 P-1B P-2A FRONT P-2A P-2A B-5 P-1A B-8 B-5 B-5 P-1A B-5 P-1B 1.2B x10 B-5 B-5 S-2C B-5 B-5 S-7 Connectors QTY S-7 56 Connector QTY B-5 10 24 of 75 Connector QTY B-8 4 Connector QTY S-2C 56 WWW.RSIWW.
Assemble Right Wall CHECK YOUR WEATHER FORECAST. DO NOT CONTINUE ASSEMBLY DURING WINDS. W-1 W-1 W-1 W-1 F-7 F-7 2.1A F-7 F-7 W-1 W-1 F-7 F-7 P-1A P-1A P-1B P-1B P-1A P-1A P-1A P-1A P-1B P-1B W-1 W-1 P-1B P-1B F-7 F-7 P-1B P-1B P-1A P-1A W-1 F-7 2.1B 2.1C W-1 W-1 P-1B W-1 W-1 W-1 W-1 F-7 F-7 W-1 W-1 P-1A P-1A F-7 W-1 W-1 P-1A P-1A W-1 W-1 P-1B P-1B F-7 F-7 B-3 B-3 B-3 B-3 B-3 F-7 F-7 W-1 W-1 P-1B P-1B W-1 W-1 P-1A P-1A 2.
2.2A F-7 W-1 F-1 W-1 spacer tool 2.2B F-1 F-1 F-1 S-2C F-1 F S-2C S-2C S-7A S-7A B-3 B-3 F-1 F-1 B-3 B-3 B-3 B-3 (2.2A - 2.2B) x 9 2.2C (2.1A - 2.1E) x 1 Profile QTY 56” Panel 24” x 57” Connectors F-7 1 F-1 9 QTY W-1 10 56” 26 of 75 QTY B-3 11 S-2C 22 S-7 22 WWW.RSIWW.
2.3A G-2 W-1 F-1 G-1 W-1 F-1 W-1 W-1 ¼” ¼” F-7 G-1 NOTE: At front and back, edge of G-1 gutter profile lines up flush with edge of F-7 corner profile. F-7 G-1 2.3B G-2 G-2 G-2 W-1 G-2 W-1 F-7 W-1 W-1 F-1 F-1 W-1 F-1 G-1 W-1 F-1 W-1 F-1 W-1 F-1 W-1 F-1 W-1 F-1 W-1 F-1 F-7 W-1 48 ½” Profile QTY 25 ½” 48 ½” WWW.RSIWW.
S-7 2.4A S-7 B-5 -1 S-7 B-5 x5 B-5 S-7 G-2 x5 F-1 2.4B B-5 B-5 S-7S-7A S-7 G-1 B-5 B-5 B-5 B-5 S-7A S-7A S-7A S-7A G-2 B-5 S-7A B-5 G-2 F-1 G-1 B-5 F-1 W-1 W-1 F-7 2.4C G-1 G-1 G-2 G-2 B-5 B-5 F-1 G-1 G-1G-2 G-1 G-2 B-5 F-1 G- F-1 B-5 x5 F-1 F-1 W-1 Connector QTY B-5 G-1 Connector 5 G-1 28 of 75 G-2 S-7 G-2 QTY 15 Connector QTY S-2C 10 WWW.RSIWW.
2.5A G-2 G-1 G-2 G-2 2 G-1G-1 B-3 G-1 G-2 G-2G-2 W-1 G-1 F-1 G-1G-1 W-1 W-1 W-1 W-1 W-1 B-3 B-3 W-1 S-2C 2.5E -2C W-1 W-1 G-1 F-1 F-1 G-1 F-1 2.5B G-1 F-1F-1 G-1 G-2G-2 W-1 W-1 W-1 W-1 G-1 W-1 G-2 W-1 S-7A W-1 S-7A S-7A G-2 G-2 F-1 S-7A W-1 S-7A S-7A F-1F-1 W-1 W-1 W-1 S-7A W-1 W-1 S-7A G-2 G-1 F-1F-1 G-2 G-1G-1 W-1 G-2 G-2 F-1 W-1 W-1 W-1 W-1 F-1 W-1 F-1 F-1 2.5F (2.5A - 2.5F) x 5 Connectors WWW.RSIWW.COM 29 of 75 W-1 W F-1F-1 W-1 W-1 W-1 W-1 G-2G 2.
2.6A S-7A G-2 G-2 B-3 B-3 S-7A F-1 F-1 S-7A 2 G-2 2.6B G-2 G-2 B-3 F-1 F-1 S-7A 2 G-2 S-7A 2.6C G-2 B-3 F-1 F-1 B-3 B-3 S-7A 2.6D G-2 G-2 B-3 B-3 F-1 S-7A F-1 2.6e (2.6A - 2.6D) x 6 Connectors 30 of 75 QTY B-3 6 S-2C 12 S-7 12 WWW.RSIWW.
Assemble Back Wall CHECK YOUR WEATHER FORECAST. DO NOT CONTINUE ASSEMBLY DURING WINDS. 3.1a F-8 W-1 F-7 3.1B F-7 W-1 F-8 W-1 spacer tool spacer tool 3.1c F-8 F-8 F-8 S-2C S-2C S-2C B-3 B-3 B-3 B-3 QTY Profile 72” F-8 F-8 F-8 31 of 75 B-3 Panels 1 B-3 B-3 QTY W-1 24” x 57” WWW.RSIWW.
3.1d F-8 W-1 F-1 spacer tool F-1 F-1 F-1 F-1 F-1 F-1 S-2C S-7A B-3 S-2C F-1 F-1 S-7A S-7A B-3 S-2C B-3 B-3 3.1e B-3 B-3 B-3 3.1F F-8 W-1 F-7 F-8 W-1 W-1 F-7 3.1G F-1 W-1 F-8 spacer tool spacer tool spacer tool 3.1H F-8 F-8 F-8 S-2C S-2C S-2C F-8 F-8 F-8 S-7A S-7A B-3 B-3 F-8 F-8 B-3 B-3 B-3 QTY Profile 56” 72” F-1 1 F-8 1 32 of 75 B-3 Panels 24” x 57” QTY W-1 B-3 B-3 2 Connector QTY B-3 S-2C S-7 2 4 4 WWW.RSIWW.
W-1 W-1 F-7 W-1 W-1 F-7 3.2A F-7 F-7 W-1 W-1 F-7 W-1 W-1 F-7 P-1A P-1A P-1B P-1B P-1A P-1A P-1B P-1B P-1A P-1A P-1B P-1B F-7 F-7 P-1B P-1B P-1A P-1A W-1 F-7 3.2B 3.2C W-1 W-1 P-1B F-7 F-7 W-1 W-1 P-1A P-1A P-1A P-1A B-3 B-3 W-1 W-1 P-1A P-1A 3.
3.4A F-6 G-1 F-7 W-1 F-8 F-6 F-10 3.4B F-7 F-8 F-1 W-1 3.4c F-10 F-10 F-8 W-1 W-1 F-1 Profile QTY 23” 23” 34 of 75 F-6 1 F-10 2 WWW.RSIWW.
3.4D F-10 F-10 F-6 W-1 F-8 F-7 3.5A B-1 F-1 W-1 B-1 S-7A B-1 S-7A S-7A S-7A S-7A S-7A 3.5B S-7A S-7A S-7A S-7A F-6 F-6 F-6 F-10 F-10 F-10 F-10 F-10 F-10 F-6 F-6 F-6 S-7A F-8 F-8 F-8 F-1 F-1 F-1 F-8 F-8 F-8 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 3.5C Profile QTY 23” 23” WWW.RSIWW.
Assemble Left Wall 4.1A F-7 W-1 F-1 W-1 spacer tool 4.1B F-1 F-1 F-1 S-2C S-2C S-2C F-1 F S-7A S-7A B-3 B-3 F-1 F-1 B-3 B-3 B-3 B-3 (4.1A - 4.1B) x 9 Connector QTY Profile 56” F-1 Panel 9 24” x 57” 36 of 75 QTY W-1 11 QTY B-3 S-2C S-7 9 18 18 WWW.RSIWW.
W-1 W-1 F-7 W-1 W-1 F-7 4.2A F-7 F-7 W-1 W-1 W-1 W-1 F-7 F-7 P-1A P-1A P-1B P-1B P-1A P-1A P-1A P-1A P-1B P-1B P-1B P-1B F-7 F-7 P-1B P-1B P-1A P-1A W-1 F-7 4.2B 4.2C W-1 W-1 P-1B F-7 F-7 W-1 W-1 P-1A P-1A P-1A P-1A B-3 B-3 W-1 W-1 P-1A P-1A 4.
4.3A G-2 W-1 F-1 G-1 W-1 F-1 W-1 W-1 ¼” ¼” F-7 G-1 NOTE: At front and back, edge of G-1 gutter profile lines up flush with edge of F-7 corner profile. F-7 G-1 4.3B G-2 G-2 G-2 W-1 G-2 W-1 F-7 W-1 W-1 F-1 F-1 W-1 F-1 G-1 W-1 F-1 W-1 F-1 W-1 F-1 W-1 F-1 W-1 F-1 W-1 F-1 F-7 W-1 48 ½” Profile QTY 25 ½” 48 ½” 38 of 75 G-1 2 G-2 4 WWW.RSIWW.
4.4A S-7 B-5 S-7 B-5 B-5 -1 G-2 S-7 B-5 B-5 B-5 S-7 S-7A S-7 G-1 G-2S-7A S-7A S-7A x5 B-5 S-7A B-5 G-2 F-1 4.4B B-5 B-5 B-5 x5 F-1 G-1 B-5 F-1 W-1 W-1 F-7 4.4C G-1 G-1 G-2 G-2 B-5 B-5 F-1 G-1 G-1G-2 G-1 G-2 B-5 F-1 F-1 B-5 x5 F-1 F-1 W-1 Connector QTY B-5 G-1 WWW.RSIWW.
4.5A G-2 G-1 G-2 G-2 2 G-1G-1 B-3 G-1 G-2 G-2G-2 W-1 G-1 F-1 G-1G-1 W-1 W-1 W-1 W-1 W-1 B-3 B-3 W-1 S-2C 4.5E -2C W-1 W-1 F-1 G-1 4.5B G-1 F-1F-1 G-1 G-2G-2 W-1 W-1 W-1 G-2 F-1 G-1 W-1 S-7A W-1 S-7A S-7A W-1 S-7A W-1 W-1 S-7A G-2 G-1 F-1F-1 G-2 G-2G 4.5D G-1G-1 W-1 G-2 G-2 F-1 W-1 G-1 G-1 W-1 W-1 W-1 W F-1F-1 W-1 W-1 W-1 F-1 F-1 F-1 W-1 4.
4.6A S-7A G-2 G-2 B-3 B-3 S-7A F-1 F-1 S-7A 2 G-2 4.6B G-2 G-2 B-3 F-1 F-1 S-7A 2 G-2 S-7A 4.6C G-2 B-3 F-1 F-1 B-3 B-3 S-7A G-2 4.6D G-2 B-3 B-3 F-1 S-7A F-1 4.6E (4.6A - 4.6D) x 6 WWW.RSIWW.
B-2 Assemble Front Wall and Gable F-8 5.1A 5.1B D-8 D-8 S-8 S-2A x4 x4 F-8 D-8 D-8 5.1C F-8 7” 7” (178mm) (178mm) D-8 D-8 F-8 F-8 D-8 D-8 7” 7” (178mm) (178mm) 5.1D B-2 F-8 D-8 D-8 D-8 F-8 D-8 67” (1701mm) F-8 D-8 B-2 D-8 B-2 5.1D B-2 B-2 B-2 B-2 B-2 S-7A S-7A B-2 S-7A QTY B-2 S-2C S-7 2 4 4 F-8 F-8 F-8 Connectors F-8 F-8 S-7A F-8 x2 QTY Profile 72” 42 of 75 F-8 2 Connectors QTY D-8 S-8A S-2A 4 8 8 WWW.RSIWW.
5.2c 5.2A F-8 F-8 S B-2 S-7A B-3 B-3 F-8 F-8 F-7 F-8 F-8 S-2C S-7A W-1 B-3 B-3 F-8 B- F-8 S-2C 5.2B B-3 B-3 spacer tool 5.2E 5.2c 5.2D S-7A S-7A B-2 S-7A B-2 F-6 S-7A S-7A B-2 S-7A S-7A S-7A B-2 B-2 F-7 W-1 F-8 G-1 S-7A Profile QTY 23” F-6 23” WWW.RSIWW.
5.3A 5.3c F-8 F-8 S B-2 S-7A B-3 B-3 F-7 F-8 F-8 F-8 F-8 S-2C S-7A W-1 B-3 B-3 F-8 B- F-8 S-2C B-3 B-3 spacer tool 5.3B 5.3E S-7A S-7A 5.3D B-2 S-7A F-6 G-1 B-2 S-7A S-7A B-2 S-7A F-7 B-2 B-2 W-1 F-8 Profile QTY 23” F-6 23” 44 of 75 1 Connectors QTY Connector QTY B-2 1 B-3 1 S-7 5 S-2C 5 WWW.RSIWW.
5.4A F-4 F-5 S-7A S-7A F-4 23.625” ( 600mm) 23.625” B-2 ( 600mm) F-5 B-2 5.4B S-7A S-7A S-7A B-2 B-2 B-2 5.4C S-2C S-2C S-8 D-7 F-4 B-2 S-2D B-2 S-2D F-5 S-2B S-2B S-2A S-2A Profile WWW.RSIWW.
F-4 5.4D B-2 F-4 F-5 B-2 F-5 F-4 F-4 F-5 5.4E F-5 F-4 D-7 F-4 D-7 F-5 5.4F D-7 F-5 46 of 75 WWW.RSIWW.
A W-3 5.5A W-3 W-3 W-3 F-5 B-2 F-5 5.5B S-7A B-2 W-3 F-8 B-2 W-3 W-5 W-5 5.5C W-3 F-5 W-3 Panel QTY W-5 Panel 2 W-3 24” x 18½” 5.6 S-7A F-6 F-6 QTY Connectors 2 S-2C S-7 F-6 G-1 G-1 F-6 G-1 G-1 F-6 B-7 B-7 7A S-7A B-7 B-7 B-7 F-7 B-7 F-6 B-7 F-7 F-7 F-7 F-7 x2 WWW.RSIWW.
5.7A F-7 F-7 F-4 F-4 G-1 F-8 F-8 G-1 F-4 F-8 5.7B F-7 S-7A S-7A F-6 S-7A S-7A -8 F-7 C-1 C-1 G-1 F-6 F-6 S-7A S-7A C-1G-1 G-1 C-1 C-1 F-7 F-7 F-7 F-7 5.7B x 2 Connectors Profile QTY 56” F-7 2 QTY C-1 2 S-2C 6 S-7 6 5.8 F-6 Check inside corners to ensure B-7 connector is still in proper position. If it needs adjusting, repeat step 5.6 until each corner is set. G-1 B-7 F-7 48 of 75 WWW.RSIWW.
Assemble Back Gable 6.1A F-2 F-6 G-1 F-10 F-10 F-7 W-1 F-6 F-8 W-1 F-1 W-1 F-8 6.1B F-2 F-2 F-2 F-2 S-7A S-7A F-10 F-10 F-10 F-10 F-10 F-10 F-10 F-10 F-1 F-1 F-1 F-1 Profile QTY F-2 6.2 S-7A F-6 F-6 G-1 G-1 F-6 F-6 Connectors QTY S-7 1 G-1 G-1 S-2C G-1 F-6 B-7 B-7 B-7 S-7A B-7 B-7 B-7 F-7 B-7 F-7 F-7 F-7 F-7 x2 Connectors QTY B-7 S-2C WWW.RSIWW.
6.3A B-1 S-7A S-7A S-7A x3 6.3b S-7A F-8 F-2 F-8 F-10 F-10 B-1 F-1 B-1 B-1 6.3C x3 Connectors QTY B-1 S-2C 3 12 6.4 W-3 W-4 W-4 W-3 Panel QTY W-3 50 of 75 2 Panel QTY W-4 2 WWW.RSIWW.
6.5A F-7 F-2 F-7 F-8 F-8 6.5B S-7A F-7 S-7A F-6 S-7A S-7A F-7 C-1 C-1 G-1 F-6 F-6 S-7A S-7A C-1G-1 G-1 C-1 C-1 F-7 F-7 F-7 F-7 6.5B x 2 Connectors Profile QTY 56” F-7 2 6.6 Check inside corners to ensure B-7 connector is still in proper position. If it needs adjusting, repeat step 6.2 until each corner is set. WWW.RSIWW.
10 Assemble Roof Ridge R-1 R-1 B-10 7.1A R-1 B-10 B-10 B-10 B-10 B-10 R-1 7.1BB-10 B-10 R-1 B-10 B-1 B-10 B-10 R-1 B-10 R-1 B-10 B-10 R-1 R-1 R-1 B-10 B-10 R-1 B-10 B-10 R-1 R-1 B-10 B-10 R-1 B-10 7.1C R-1 R-1 R-1 R-1 B-10 B-10 B-10 R-1 B-10 B-10 R-1 B-10 B-10 R-1 B-10 B-10 B-10 B-10 B-10 R-1 R-1 R-1 7.1D B-10 B-10 B-10 B-10 R-1 B-10 R-1 R-1 R-1 B-10 B-10 49¾” B-10 +.
R-1E S-7A S-7A 7.1E S-7A S-7A R-1 S-5A R-1E R-1E R-1ER-1 R-1E B-5 S-5A R-1 R-1E S-5A R-1 R-1 R-1 R-1E R-1E R-1E 7.1F R-1 R-1E B-5 R-1E S-5A R-1 R-1E B-5 7.1G R-1 R-1E R-1 R-1E R-1 R-1E R-1 S-7A S-7A S-7A S-7A 7.1H S-5A R-1E S-7A S-7A S-7A S-7A R-1 B-5 B-5 S-5A R-1 R-1E Profile 49¾” 49¾” 48½” 48½” WWW.RSIWW.
7.2A (7.1A - 7.1E) x 2 R-1 R-1E R-1E R-1E R-1 R-1E R-1E R-1E 7.2B (7.1A - 7.1E) x 1 R-1 R-1E R-1E R-1E R-1 R-1 R-1E R-1E Profile R-1E R-1 49¾” 48½” R-1 Connectors QTY R-1 R-1 1 R-1E R-1E 2 QTY B-10 6 S-5 3 Connectors R-1 QTY S-7 12 S-5A 3 S-2C 15 7.3A 49¾” R-1 R-1 R-1 R-1 R-1 R-1 48½” R-1E R-1E R-1E R-1E R-1 R-1 R-1E R-1E R-1E R-1 R-1 R- R-1 R-1E R-1E R-1E R-1E R-1E R-1 R-1E R-1E R-1 54 of 75 WWW.RSIWW.
7.3B R-1 F-7 F-7 W-5 W-5 7.4 R-1 R-1 R-1 R-1 B-7 S-7A S-7A F-2 S-7A F-7 B-7 S-7A S-7A S-7A F-4 S-7A F-4 F-2 S-7A F-7 B-7 F-7 B-7 F-4 F-7 F-2 F-2 F-7 F-7 F-7 Connectors 7.4 x 2 QTY B-7 2 S-2C 4 S-7 4 7.5A 2 C-2 C-2 C-2 R-1 R-1 C-2 S-7A S-7A S-7A F-7 S-7A F-7 F-7 F-7 F-7 F-7 F-7 F-7 F-7 F-4 R-1 R-1 C-2 F-7 S-7A S-7A R-1 F-2 F-4 F-2 F-4 F-2 F-4 F-2 F-4 F-2 7.5A x 2 Connector WWW.RSIWW.
Assemble Roof 1 3 1 2 2 2 2 2 3 3 Section 1: W-1 Section 2: W-1 Section 3: W-1 2 2 2 2 2 3 2 1 3 1 8.1A x4 x 11 x 1, W-2 x5 R-1 R-1 B-4 B-4 S-7A F-1 S-7A R-1 R-1 R-1 B-4 S-7A F-1 A R-1 R-1 R-1 B-4 F-1 B-4 S-7A x8 F-1 Connector QTY S-7 56 of 75 8 Connector QTY B-4 S-2C 8 8 WWW.RSIWW.
8.1b B-4 B-4 bungee cord bungee cord bungee cord bungee cord B-4 x5 8.1C B-4 B-4 Materials: Three 8’ 2x4s cut to 78” +/-2” based on type of flooring. B-4 R-1 8.2A F-7 W-1 G-1 W-1 F-7 W-1 F-7 R-1 R-1 W-1 R-1 F-7 R-1 W-1 F-7 G-1 F-7 R-1 R-1 W-1 G-1 F-7 F-7 W-1 F-7 W-1 G-1 W-1 G-1 W-1 G-1 Panel F-7 W-1 W-1 WWW.RSIWW.
R-1 8.2B x2 R-1 F-7 W-1 R-1 W-1 F-7 F-1 F-1 F-1 R-1 F-7 W-1 R-1 F-1 R-1 W-1 F-7 F-1 G-1 F-7 W-1 W-1 R-1 F-1 R-1 F-1 W-1 W-1 W-1 F-7 G-1 W-1 F-1 F-1 W-1 F-1 F-7 G-1 F-1 G-1 F-1 G-1 8.2C x2 F-1 F-1 S-7A F-1 S-7A S-7A B-4 S-7A 8.2D B-4 B-4 F-1 F-1 B-4 B-4 F-1 R-1 B-4 F-1 R-1 B-4 F-1 F-1 R-1 F-1 F-1 S-7A 7A S-7A B-4 F-1 S-7A B-4 B-4 S-7A Profile QTY F-1 2 58 of 75 Connector QTY S-7 6 Connectors QTY B-4 S-2C 3 6 WWW.RSIWW.
8.2E B-4 B-4 B-4 W-1 W-1 8.2F (8.2B - 8.2D) x 1 F-1 B-4 B-4 8.2G B-4 B-4 B-4 8.3A W-1 Note: W-2s will be installed in step 8.4 8.3B (8.2B) x 1 F-1 Connectors Panel QTY W-1 WWW.RSIWW.
S-7A S-7A 8.3C x2 S-7A F-1 S-7A 8.3D R-1 F-1 B-4 S-7A F-1 F-1 F-1 B-4 R-1 R-1 S-7A 7A B-4 F-1 B-4 -4 F-1 S-7A S-5B S-5B R-1 S-7A F-1 F-1 R-1 B-4 S-2C S-2C B-4 8.3E W-1 B-4 B-4 B-4 W-1 S-5B S-2C 8.3F (8.2B - 8.2D) x 1 F-1 B-4 B-4 8.3G Connectors B-4 B-4 Panel QTY W-1 2 F-1 60 of 75 S-5B 1 B-4 6 QTY S-2C 11 2 S-7 10 B-4 Profile QTY WWW.RSIWW.
8.3H W-1 8.3I 8.3J (8.2B) x 1 F-1 (8.3C - 8.3D) x 1 B-4 8.3K W-1 B-4 B-4 B-4 W-1 8.3L (8.2B - 8.2D) x 1 F-1 B-4 B-4 8.3M Connectors B-4 B-4 Panel QTY W-1 WWW.RSIWW.
8.3N B-4 B-4 B-4 W-1 8.3O (8.2B) x 1 8.3P (8.3C - 8.3D) x 1 F-1 B-4 8.3Q B-4 B-4 B-4 8.3R W-1 W-1 W-1 Connectors W-1 Panel QTY W-1 Profile 5 F-1 62 of 75 QTY S-5B 1 B-4 3 QTY S-2C 5 2 S-7 4 WWW.RSIWW.
8.3S (8.2B - 8.2D) x 1 8.3T (8.2B) x 1 8.3U (8.3C - 8.3D) x 1 F-1 B-4 B-4 F-1 B-4 8.4 W-2 W-2 W-2 W-1 W-2 W-1 F-1 F-1 F-1 F-1 F-1 F-1 W-2 W-1 W-2 Connectors Panels QTY W-2 Profile WWW.RSIWW.
8.5A S-7 x4 S-7 B-9 B-9 S-2C S-2C 8.5B R-1 R-1 F-1 F-1 F-1 F-1 B-9 B-9 R-1 R-1 8.5C Connectors QTY S-7 64 of 75 8 Brace QTY B-9 S-2C 4 8 WWW.RSIWW.
G-1 G-1 8.6 F-7 F-7 C-1 C-1 G-1 -1 W-8 W-8 G-4 G-4 G-1 = G-1 = W-8 G-4 G-1 G-4 G-1 = W-8 G-4 x10 F-7 G-1 = F-7 G-4 C-1 W-8 F-7 G-4 = F-7 W-8 W-10 G-1 G-4 G-4 x12 G-4 G-1 G-4 F-1 Trim Plate G-4 8.7 G-1 G-4 W-8 F-7 F-7 QTY G-4 4 G-4E 6 W-8 x4 C-1 G-3 C-1 G-3 C-1 Gutter Drain QTY G-3 WWW.RSIWW.
Install Roof Vents 9.1A 4xs V-3 adjusting knob cylinder 9.1B A = cylindercylinder BA = B A piston rod rod piston B arm B arm B A arm A 9.1C B arm A 9.1D 6” 9.1E (9.1A - 9.1D) x 4 Handle QTY Cylinder 4 QTY 4 66 of 75 Adjusting Knob QTY 4 Threaded Stud QTY 8 WWW.RSIWW.
9.2A Center line for Arm A V-2 V-2 V-2 A) x” A) x” = B) x” B) x” V-2 V V-2 9.2B V-2 V-2 V-2 V-2 S-1 S-1 S-1 S-1 S-1 S-1 S-1 V-2 S-1 S-1 V-2 V-2 Factory Assembled Vent S-1 S-1 S-1 WWW.RSIWW.
9.2C S-1 S-1 9.2D S-1 g ch S-1 V-2 9.2E V-2 S-1 S-1 V-2 gripping channel S-1 V-2 V-2 S-1 9.2F 9.3A S-1 V-2 V-2 Connector (9.2A - 9.2E) x 4 QTY S-1 8 Gripping Channel QTY 4 x4 R-1 V-2 F-7 V-2 V-2 R-1 R-1 68 of 75 WWW.RSIWW.
9.3B W-2 W-2 S-1 9.3B S-1 S-1 gripping channel 9.3C V-2 S-1 S-1 S-1 9.3A - 9.3B x 4 NOTE: Make sure arm A overlaps aluminum trim on W-2 W-2 Connector gripping channel QTY S-1 Gripping Channel QTY 4 8 9.4A R-1 R-1 R-1 V-2 R-1 S-6 V-2 V-2 R-1 S-6 S-6 V-2 -2 V-2 S-6 R-1 S-6 S-6 W-2 W-2 9.4B Connector 9.4A x 4 WWW.RSIWW.
Assemble and Install Doors 10.1A E-2 E-2 10.1B E-2 S-9 D-9 D-9 x2 x2 Do not over tighten as it may damage the vent. 10.1c E-1 S-9 E-2 D-9 D-9 E-2 E-1 x2 E-1 E-1 10.1D W-6 W-6 E-3 10.1E E-3 E-3 Profile QTY 22¼” 24” 68½” E-3 1 E-1 2 D-9 2 E-2 1 S-9 4 70 of 75 Connectors QTY Panel QTY W-6 2 WWW.RSIWW.
10.2A E-1 10.1A x 1 E-2 D-9 x2 S-9 S-9 E-1 E-1 E-2 D-9 D-9 E-2 10.2B E-4 E-2 E-2 E-4 S-9 E-4 S-9 E-4 E-2 E-2 E-4 E-2 S-9 S-9 E-4 E-4 E-2 10.2C W-6 W-6 D-6 S-10 D-6 E-3 E-3 S-1 S-10 W-6 W-6 E-2 E-2 E-4 E-4 Connectors Profile 68½” WWW.RSIWW.
10.3A (10.1A - 10.2A) x 1 S-9 10.3B S-9 S-9 S-9 S-9 E-2 S-9 x2 E-2 10.3C B-3 S-9 D-9 E-2 B-3 E-1 S-9 E-1 10.3D W-6 W-6 S-10 D-6 D-6 E-3 E-3 W-6 W-6 E-2 E-2 Profiles Connector QTY B-3 S-9 S-1 S-10 Panel QTY 22¼” QTY 24” 1 9 W-6 2 68½” 72 of 75 Connectors QTY E-3 1 D-6 1 E-1 2 S-10 2 E-2 1 D-9 4 WWW.RSIWW.
10.4A F-8 90° D-9 E-2 S-9 F-8 10.4B D-9 E-2 10.4C S-9 x4 10.4D D-7 Connector QTY B-3 S-9 8 10.5 D-4 F-5 F-8 D-4 F-8 D-4 Connector E-1 D-4 WWW.RSIWW.
10.6A S-7 E-3 E-3 S-2C D-10 S F-8 E-2 3xs E-3 E-3 F-8 10.6B 10.6C D-10 D-10 S-2C D-10 S-7A D-10 E-3 S-9 E-3 S-7A F-8 E-2 D-10 S-7A D-10 S-9 E-3 10.6D 10.6E E-2 E-3 S-7 S-9 F-8 S-2C D-10 D-10 D-10 S-7A 3xs E-3 10.6F E-3 E-2 E-3 D-10 D-10 D-10 S-9 D-10 D Connectors QTY E-3 74 of 75 E-2 F-8 D-10 2 S-9 2 Connectors E-3 QTY S-2C 2 S-7 2 WWW.RSIWW.
Secure to Platform 11.1 S-4 Connector x89 QTY S-4 89 A-2 11.2a S-2C A-2 S-2C A-2 A-2 S-2C A-2 S-7 11.2A x 10 S-7 11.2B S-7 A-1 x10 Connectors Bracket QTY A-2 WWW.RSIWW.