Use and Care Manual

WWW.RSIWW.COM
21 of 45
NOTE: VIEWS FROM OUTSIDE UNDER GUTTER.
NOTE: VIEWS FROM OUTSIDE UNDER GUTTER.
NOTE: The bottom of B-3 connector extends past the edges of side and corner
profiles. B-3 connector sits over B-5 connector. Secure all with 2-SC bolts.
The gutters are secured together using B-5 connectors and attached to
side profiles using B-3 connectors on the outside of the greenhouse.
The B-3 connector uses the T-bolt in the center hole of B-5
connectors at seams. Loosen and slide T-bolts to line up
with connectors making sure the seams line up and the
gutters remain straight.
Beginning at the seams, arrange T-bolts so middle bolt is centered.
Fit B-5 connector onto gutter and hold in place using the two S-2C end bolts.
Loosen T-bolts on side profiles and slide down. Place B-3 connector on center T-bolt on gutter.
Insert T-bolt assembly through slot in B-3 connector to secure as shown.Tighten T-bolts and
secure with S-2C caps.
4.5A
4.5B
4.5c
F-7
G-1
G-2
F-1
W-1
W-1
B-5
B-5
B-3
B-5
B-3
Connector QTY
S-7 11
Connector
QTY
B-3 11
S-2C 42
Connector
QTY
B-5
5