Monticello Made in the USA 8’ x 20’ Greenhouse Assembly Instructions 180701V Register Now to receive timely updates, reminders and special offers for your product. Scan the QR code above or go to www.RSIWW.com and select the user registration link. 40 Richboynton Rd, Dover, NJ 07801 facebook.com/RiverstoneGreen twitter.com/@RiverstoneGreen linkedin.com/company/riverstone-industries youtube.com/RSIWW Customer Service: (877) 373-3078 Email: customerservice@rsiww.
Thank you for choosing the Monticello Greenhouse Program We want to thank you for your purchase of the Monticello Greenhouse. We appreciate your support of our American Made Greenhouses. The Monticello is designed for the average homeowner; no special degrees are needed. The time to assemble depends on the weather, skills, options, and number of helpers you have in the process.
Merci d’avoir choisi le programme de serre de Monticello Nous voulons vous remercier pour votre achat de la serre Monticello. Nous apprécions votre soutien de nos serres américaines. Le Monticello est conçu pour le propriétaire moyen; aucun diplôme spécial n’est nécessaire. Le temps de rassemblement dépend du temps, des compétences, des options et du nombre d’aides que vous avez dans le processus.
Gracias por elegir el Programa de Invernadero de Monticello Queremos agradecerle por la compra de Monticello Greenhouse. Agradecemos su apoyo a nuestros Invernaderos Americanos. El Monticello está diseñado para el propietario promedio; no se necesitan títulos especiales. El tiempo para reunirse depende del clima, las habilidades, las opciones y la cantidad de ayudantes que tenga en el proceso.
MONTICELLO Limited Warranty/ Liability Snow Load & Wind Load Warranty & Liability The Monticello Greenhouse described in this manual is designed for and limited to Riverstone Industries standard wind and snow load which is based on a continuously heated greenhouse. Standard loads are: Wind Load = 65 mph continuous winds, Snow load of 24 lbs. sq ft.
MONTICELLO Garantie/Responsabilité Charge de neige et Charge Vent Garantie et responsabilité L’ effet de serre Monticello décrit dans ce manuel est conçu et limité à Riverstone Industries vent standard et la charge de neige qui est basée sur une serre chauffée en continu. charges standard sont : Wind Load = 65 mph vents continus, la charge de neige de 24 lbs. sq ft.
Monticello Limited Garantía/Responsabilidad Carga de nieve y viento de carga Garantía y Responsabilidad El efecto invernadero Monticello descrito en este manual está diseñado y limitado a Riverstone Industrias viento estándar y carga de nieve que se basa en un invernadero con calefacción continua. cargas estándar son: El viento carga = 65 mph vientos continuos, carga de nieve de 24 lbs. sq ft .
Dispute Resolution Jurisdictional Limitations and Procedures: It is agreed that all transactions involving Riverstone Industries products originate and occur within the State of New Jersey.
Resolución de disputas Limitaciones y procedimientos jurisdiccionales: Se acuerda que todas las transacciones que involucran productos de Riverstone Industries se originan y ocurren dentro del Estado de Nueva Jersey.
Int roduct ion Thank you for purchasing t he Mont icelloTM Greenhouse. The Mont icello line is proudly made in t he USA by a leading commercial greenhouse maker using t he same professional grade mat erials and design. The frame is const ruct ed wit h t he highest qualit y ext ruded aluminum wit h lead free powder-coat ed paint . The panels are professional grade 8 mm t win wall polycarbonat e select ed for t heir insulat ion and durabilit y.
Int roduct ion Nous vous remercions d’avoir achet é le Greenhouse Mont icelloTM . La ligne Mont icello est fièrement fabriqué aux Et at s-Unis par un fabricant leader de serre commerciale en ut ilisant les mêmes mat ériaux de qualit é professionnelle et de design. Le châssis est const ruit avec l’ aluminium ext rudé haut e qualit é avec de la peint ure par poudrage sans plomb. Les panneaux sont de qualit é professionnelle 8 mm polycarbonat e double paroi sélect ionnés pour leur isolat ion et durabilit é.
Int roducción Gracias por adquirir el Invernadero de Mont icelloTM ust ed. La línea de Mont icello se hace orgulloso en los EE.UU. por un fabricant e de invernadero comercial que lleva ut ilizando los mismos mat eriales de calidad profesional y de diseño. El bast idor est á const ruido con la más alt a calidad de aluminio ext ruido con pint ura con pint ura en polvo libre de plomo. Los paneles son de grado profesional de 8 mm de policarbonat o de doble pared seleccionados por su aislamient o y durabilidad.
Safet y Advice Table of Cont ent s • The greenhouse must be positioned and fixed on a flat level surface. • Dispose of all plastic bags safely. Keep them out of the reach of small children. • Keep children and pets away from the assembly area until the work is completed. • Always wear work shoes, gloves and safety goggles when working. • Some of the parts have sharp edges and burs. Use extreme caution when handling. • Do not lean against or push the greenhouse during assembly.
Conseils de Sécurit é Table des Mat ières • La serre doit être positionné et fixé sur un plat surface plane. • Jetez tous les sacs en plastique en toute sécurité. Gardez-les hors de la la portée des petits enfants. • Gardez les enfants et les animaux loin de la zone d’assemblage jusqu’à ce que le travail est terminé. • Toujours porter des chaussures de travail, des gants et des lunettes de sécurité lors du travail. • Certaines pièces ont des arêtes vives et des fraises.
Consejos de Seguridad Tabla de Cont enido • El invernadero debe estar colocado y fijado sobre una superficie plana superficie nivelada. • Deseche todas las bolsas de plástico de forma segura. Mantenerlos fuera de la alcance de los niños. • Mantenga a los niños y mascotas lejos de la zona de montaje hasta el trabajo se ha completado. • Siempre use zapatos de trabajo, guantes y gafas de seguridad cuando trabajan. • Algunas de las piezas tienen bordes afilados y las fresas. Tenga mucho precaución al manejar.
Const ruct ing a Wood Plat form IMPORTANT: It is very important to begin with a level surface. Check your foundation to ensure it is level at every point. If you are not building on a wood deck, we recommend constructing a wood platform so you can properly secure the greenhouse. You must assure your foundation is square and level before beginning assembly. Aft er choosing a locat ion, proper preparat ion of t he sit e is essent ial. The sit e must be level.
La const ruct ion d’une plat e-forme en bois IMPORTANT : Il est très important de commencer par une surface plane . Vérifiez votre fondation pour assurer qu’il est de niveau à chaque point. Si vous n’êtes pas la construction sur une terrasse en bois , nous vous recommandons de construire une plate-forme de bois afin que vous puissiez correctement sécuriser la serre . Vous devez assurer votre fondation est carré et de niveau avant de commencer l’assemblage .
La const rucción de una plat aforma de madera IMPORTANTE : Es muy importante comenzar con una superficie nivelada. Compruebe su fundación para asegurar que esté en cada nivel punto. Si no está construyendo en una cubierta de madera, se recomienda la construcción de una plataforma de madera para que pueda adecuadamente asegurar el efecto invernadero. Usted debe asegurarse de que su fundación es cuadrada y nivelada antes de comenzar el montaje.
List of Part s WARNING: Profiles with cut edges and/ or drilled holes are sharp. Use extreme caution when handling. The greenhouse is shipped in mult iple cart ons. These cart ons are heavy. Use care when lift ing t hem. Some part s have sharp edges. Use ext reme caut ion when handling. Wear proper safet y gear including work shoes, gloves and safet y goggles. Keep children and pet s away unt il assembly is complet e. Finish assembling t he roof in one session.
List of Part s (cont inued) Profile PT# QTY Profile Steps 4 QTY Steps R-1E 3 7 W-1 42 2, 3, 4 W-2 4 8 W-3 4 4, 5 W-4 2 6 W-5 2 4 W-6 4 10 PT# QTY Steps G-4 4 8 G-4E 6 8 PT# QTY Steps V-3 4 9 48 ½” 23” F-6 PT# 5, 6 56” 24” x 57” F-7 8 2, 3, 4, 5, 6 72” F-8 4 5, 6 23” 24” x 15 ½” F-10 2 3 25 ½” 24” x 31 ¼” G-1 4 2, 4 48 ½” 24” x 18½” G-2 8 2, 4 24” x 34” 50½” P-1A 4 1 P-1B 4 1 Trim Plates 49 ¾” 48 ½” 52⅛” P-2A 3 1 P-2B 3 1 Ve
List of Part s (cont inued) Connectors WARNING: Use extreme caution when handling panels with cut edges. The corners are sharp.
List of Part s (cont inued) Hardware Gutter Drain PT# QTY Steps S-1 16 9 S-2C 476 1-8,10-12 S-2A 2 5 S-2B 2 5 S-2D 2 5 S-4 95 11 S-5A 4 7 S-5B 4 8,12 S-5D 4 8,12 S-6 8 9 Brace QTY Steps G-3 4 8 PT# QTY Steps B-9 4 8 B-11 18 8 B-12 2 8 PT# QTY Steps A-1 10 11 A-2 10 11 PT# QTY Steps T-10 1 1-11 T-2 1 1-10 T-3 1 2, 3, 4 22.
Using T-Bolt s 2x’s + S-7 = S-2C S-7A Visit us at WWW.RSIWW.com/AssemblyQuestions for key assembly images and helpful tips. 22 of 81 WWW.RSIWW.
Icon Key Key Icon Clave Icono x4 Repeat specified number of t imes. Répét it ion nombre de fois spécifié. Repit a el número especificado de veces. (1.3A-1.3E) X 8 Repeat specified st eps, specified number of t imes. Répét ez les ét apes indiquées, le nombre de fois spécifié. Repet ir los pasos especificados, el número de veces especificado. View from inside. Vue de l’int érieur. Vist a desde el int erior. View from out side. Vue depuis l’ext érieur. Ver desde fuera. Requires t wo people and ladder.
Make sure angle is square. Apply aluminum t ape. Assurez-vous que l’angle est carré. Appliquer du ruban d’aluminium. Asegúrese de que el ángulo es cuadrada. Aplicar cint a de aluminio. Exercise caut ion: sharp edges! Make cert ain t he pieces are in t he correct posit ions before securing. Once set t hey cannot be un-done!! Exercise caut ion: sharp edges! Exercise caut ion: sharp edges! Assurez-vous que les pièces sont dans la bonne posit ion avant de fixer.
WWW.RSIWW.
WWW.RSIWW.
WWW.RSIWW.
7.1D R-1 B-10 B-10 R-1 B-10 R-1 B-10 B-10 R-1 B-10 +.25” 7.1E R-1 R-1E R-1E R-1 R-1E R-1 R-1 R-1E 7.1F S-5A R-1E S-5A R-1E R-1 48½” 28 of 81 WWW.RSIWW.
7.2A (7.1A - 7.1H) x 2 R-1 R-1E R-1E R-1E 7.2B (7.1A - 7.1H) x 1 R-1 R-1E R-1E R-1E R-1 WWW.RSIWW.
Pre-Assembly Doors 10.1A E-2 10.1B E-2 S-9 D-9 x2 x2 Do not over t ight en as it may damage t he vent . E-1 10.1c S-9 D-9 E-1 x2 E-1 10.1D W-6 W-6 E-3 10.1E E-3 E-3 Profile QTY 22¼” 24” E-3 1 E-1 2 Connect ors QTY D-9 Panel QTY 2 W-6 68½” E-2 1 30 of 81 S-9 2 4 WWW.RSIWW.
10.2A 10.1A x 1 E-2 x2 S-9 E-1 D-9 E-2 10.2B E-4 S-9 E-4 E-2 S-9 E-4 E-2 10.2c W-6 S-10 D-6 E-3 S-10 W-6 E-2 E-4 Connect ors Profile 68½” WWW.RSIWW.
10.3A (10.1A - 10.2A) x 1 10.3B S-9 S-9 E-2 S-9 x2 10.3c B-3 D-9 E-2 E-1 S-9 10.3D W-6 S-10 D-6 S-10 E-3 W-6 E-2 Profiles QTY Connect ors QTY 22¼” Connect or QTY B-3 Panel QTY 24” 1 W-6 S-9 E-3 1 D-6 1 E-1 2 S-10 2 E-2 1 D-9 4 2 9 68½” 32 of 81 WWW.RSIWW.
Assemble Base 1.1A IMPORTANT: Make sure the base fits properly on your foundation. If not, stop and fix your foundation. P-1A P-1B P-2B P-2B P-2B P-1A BACK P-1B FRONT P-1B P-2A P-2A P-1A P-2A P-1A P-1B 1.1B 1.1B 1.1B P-1A P-1B P-2B 1.1B P-1B 1.1B P-2B P-2B P-1A x6 S-4 FRONT BACK IMPORTANT: Position P-2A and P-2B profiles at back of greenhouse. B-8 P-1A P-1B 1.1B 1.1B P-1B P-1A P-2A 1.1B P-2A P-2A Profile WWW.RSIWW.
1.2A S-2C B-8 B-8 S-7 B-8 x4 P-2A B-5 P-1A B-5 B-8 B-5 B-5 P-2A B-5 BACK P-2A P-1B P-1B P-1A B-8 B-8 P-2A FRONT P-2A B-5 P-1B P-2A B-5 P-1A B-8 B-5 B-5 P-1A P-1B 1.2B B-5 x10 B-5 S-2C B-5 B-5 S-7 Connect ors QTY S-7 56 Connect or QTY B-5 10 34 of 81 Connect or QTY B-8 4 Connect or QTY S-2C 56 WWW.RSIWW.
Assemble Right Wall CHECK YOUR WEATHER FORECAST. DO NOT CONTINUE ASSEMBLY DURING WINDS. 2.1A W-1 F-7 W-1 F-7 P-1A P-1B P-1B P-1A 2.1B 2.1c W-1 W-1 W-1 F-7 W-1 F-7 P-1B P-1A P-1B P-1A B-3 B-3 2.1D W-1 W-1 F-7 P-1B P-1A 2.1E Connect ors Panel QTY Profile QTY 56” W-1 F-7 2 24” x 57” WWW.RSIWW.
2.2A F-7 F-1 9 W-1 8 7 W-1 6 5 4 3 spacer tool 2 1 2.2B F-1 F-1 F-1 S-2C S-7A B-3 B-3 B-3 (2.2A - 2.2B) x 9 2.2c F-1 F-1 F-1 S-2C S-7A B-3 B-3 B-3 x9 Connect ors Panel QTY Profile QTY 56” W-1 F-1 9 24” x 57” 36 of 81 9 QTY B-3 18 S-2C 36 S-7 36 WWW.RSIWW.
2.3A F-7 W-1 P-1A W-1 P-1B F-7 P-1B P-1A 2.3B 2.3c W-1 W-1 W-1 F-7 W-1 F-7 P-1B P-1A P-1B P-1A B-3 B-3 2.3D W-1 W-1 F-7 P-1B P-1A 2.3E Connect ors Panel QTY Profile QTY 56” W-1 F-7 2 24” x 57” WWW.RSIWW.
Inst all Pre-Assembled Gut t er (2.4A - 2.5I) x 1 (see page 25) 2.6A G-1 G-2 G-2 B-5 G-2 B-5 G-2 G-1 B-5 B-5 B-5 G-1 G-2 G-2 B-5 G-2 B-5 G-2 G-1 B-5 B-5 B-5 G-1 G-2 G-2 G-2 G-2 G-1 2.6B G-1 G-2 G-2 G-2 G-2 G-1 W-1 W-1 F-7 W-1 W-1 W-1 F-1 F-1 F-1 W-1 F-1 W-1 W-1 W-1 F-1 F-1 W-1 F-1 38 of 81 W-1 F-1 F-1 F-7 W-1 WWW.RSIWW.
2.6c G-2 W-1 G-1 F-1 W-1 F-1 W-1 W-1 G-1 2.6D G-2 W-1 W-1 F-7 F-1 G-2 W-1 F-1 ¼” ¼” F-7 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-1 W-1 W-1 F-1 F-1 G-1 NOTE: At front and back, edge of G-1 gutter profile lines up flush with edge of F-7 corner profile. F-7 WWW.RSIWW.
2.7A G-2 G-1 G-2 B-3 W-1 S-7A W-1 G-1 B-3 2.7c W-1 G-2 W-1 F-1 2.7B G-1 B-3 G-2 W-1 S-2C W-1 F-1 G-1 B-3 2.7E W-1 G-2 W-1 F-1 2.7D G-1 S-7A W-1 S-7A W-1 G-2 F-1 G-1 W-1 F-1 W-1 2.7F 2.7G (2.7A - 2.7F) x 5 Connect ors 40 of 81 QTY B-3 5 S-2C 20 S-7 15 WWW.RSIWW.
2.8A G-2 B-3 S-7A F-1 2.8B G-2 2.8c G-2 B-3 B-3 F-1 S-7A F-1 S-7A 2.8D G-2 B-3 F-1 2.8E (2.8A - 2.8D) x 6 G-1 G-2 W-1 F-7 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-1 W-1 F-1 W-1 F-1 F-7 Connect ors WWW.RSIWW.
Assemble Back Wall 3.1A F-8 W-1 F-7 3.1B F-7 F-8 W-1 W-1 spacer tool 3.1c F-8 F-8 F-8 S-2C S-7A B-3 B-3 F-8 B-3 F-8 F-8 S-2C S-7A B-3 B-3 B-3 QTY Profile 72” F-8 Panels 1 W-1 24” x 57” 42 of 81 QTY 1 Connect or QTY B-3 S-2C S-7 2 4 4 WWW.RSIWW.
F-8 3.1D W-1 F-1 spacer tool F-1 F-1 F-1 S-2C S-7A B-3 B-3 B-3 3.1E 3.1F F-8 W-1 F-7 W-1 3.1G F-1 W-1 F-8 spacer tool 3.1H F-8 F-8 F-8 S-2C S-7A B-3 B-3 B-3 QTY Profile Panels QTY 56” 72” WWW.RSIWW.
3.2A W-1 W-1 F-7 F-7 P-1A P-1B P-1B P-1A 3.2B 3.2c W-1 W-1 W-1 W-1 F-7 F-7 P-1B P-1A P-1B P-1A B-3 B-3 3.2D W-1 W-1 F-7 P-1B P-1A 3.2E Connect or QTY Profile Panel QTY 56” F-7 1 W-1 24” x 57” 44 of 81 2 QTY B-3 S-2C S-7 2 4 4 WWW.RSIWW.
3.4A F-6 G-1 F-7 W-1 F-8 F-6 F-10 3.4B F-7 F-8 F-1 W-1 W-1 3.4c F-10 F-10 F-1 F-8 Profile W-1 QTY 23” 23” WWW.RSIWW.
3.4D F-10 F-10 F-6 F-7 3.5A B-1 F-1 W-1 F-8 W-1 B-1 S-7A B-1 S-7A S-7A S-7A S-7A S-7A S-7A S-7A S-7A S-7A S-7A F-6 F-10 3.5B F-10 F-6 F-8 F-1 F-8 B-1 B-1 1 B-1 3.5c Profile QTY 23” 46 of 81 F-6 1 Connect or QTY S-7 B-1 S-2C 11 3 11 WWW.RSIWW.
Assemble Left Wall 1 2 3 4 5 6 7 8 9 F-7 4.1A F-1 W-1 W-1 spacer tool 4.1B F-1 F-1 F-1 S-2C S-7A B-3 B-3 B-3 (4.1A - 4.1B) x 9 4.1c F-1 F-1 F-1 S-2C S-7A B-3 B-3 B-3 x9 Connect or QTY Profile 56” F-1 Panel 9 W-1 24” x 57” WWW.RSIWW.
4.2A F-7 W-1 P-1A W-1 P-1B F-7 P-1B P-1A 4.2B 4.2c W-1 W-1 W-1 F-7 W-1 F-7 P-1B P-1A P-1B P-1A B-3 B-3 4.2D W-1 W-1 F-7 P-1B P-1A 4.2E Connect ors Panel QTY Profile QTY 56” W-1 F-7 1 24” x 57” 48 of 81 1 QTY B-3 2 S-2C 4 S-7 4 WWW.RSIWW.
Inst all Pre-Assembled Gut t er (2.4A - 2.5I) x 1 (see page 25) 4.5A G-1 G-2 G-2 B-5 G-2 B-5 G-2 G-1 B-5 B-5 B-5 G-1 G-2 G-2 B-5 G-2 B-5 G-2 G-1 B-5 B-5 B-5 G-1 G-2 G-2 G-2 G-2 G-1 4.5B G-1 G-2 G-2 G-2 G-2 G-1 W-1 W-1 F-7 W-1 W-1 W-1 F-1 F-1 F-1 W-1 F-1 W-1 W-1 W-1 F-1 F-1 W-1 F-1 WWW.RSIWW.
4.5c G-2 W-1 G-1 F-1 W-1 F-1 W-1 W-1 G-1 4.5D G-2 W-1 W-1 F-7 F-1 G-2 W-1 F-1 ¼” ¼” F-7 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-1 W-1 W-1 F-1 F-1 F-7 G-1 NOTE: At front and back, edge of G-1 gutter profile lines up flush with edge of F-7 corner profile. F-7 50 of 81 WWW.RSIWW.
4.6A G-2 G-1 G-2 B-3 W-1 S-7A W-1 G-1 B-3 4.6c W-1 G-2 W-1 F-1 4.6B G-1 B-3 G-2 W-1 S-2C W-1 F-1 G-1 B-3 4.6E W-1 G-2 W-1 F-1 4.6D G-1 S-7A W-1 S-7A W-1 G-2 F-1 G-1 W-1 F-1 W-1 4.6F 4.6G (4.6A - 4.6F) x 5 Connect ors WWW.RSIWW.
4.7A G-2 B-3 S-7A F-1 4.7B G-2 4.7c G-2 B-3 B-3 F-1 S-7A F-1 S-7A 4.7D G-2 B-3 F-1 4.7E (4.7A - 4.7D) x 6 G-1 G-2 W-1 F-7 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-2 W-1 F-1 W-1 F-1 G-1 W-1 F-1 W-1 F-1 F-7 Connect ors 52 of 81 QTY B-3 6 S-2C 12 S-7 12 WWW.RSIWW.
Assemble Front Wall and Gable 5.1A 5.1B D-8 D-8 S-8 S-2A F-8 x4 x4 D-8 D-8 5.1c F-8 7” 7” (178mm) (178mm) F-8 D-8 5.1D D-8 B-2 D-8 D-8 F-8 67” (1701mm) F-8 D-8 B-2 5.1D D-8 B-2 B-2 S-7A B-2 S-7A F-8 F-8 Connect ors QTY B-2 S-2C S-7 WWW.RSIWW.
5.2c 5.2A F-8 B-2 S-7A B-3 F-8 F-7 F-8 S-2C W-1 B-3 F-8 B-3 5.2B spacer tool 5.2c 5.2D F-6 5.2E S-7A S-7A B-2 S-7A F-6 F-6 G-1 B-2 F-8 F-7 B-2 W-1 F-8 Profile QTY 23” F-6 54 of 81 1 Connect ors QTY Connect or QTY B-2 1 B-3 2 S-7 7 S-2C 7 WWW.RSIWW.
5.3A 5.3c F-8 B-2 S-7A B-3 F-7 F-8 F-8 S-2C W-1 B-3 F-8 B-3 spacer tool 5.3B F-6 5.3E S-7A S-7A 5.3D F-8 B-2 S-7A F-6 F-6 G-1 B-2 F-8 F-7 W-1 F-8 B-2 Profile QTY 23” WWW.RSIWW.
5.4A F-4 F-5 F-4 23.625” ( 600mm) 23.625” ( 600mm) F-5 B-2 5.4B S-7A S-7A S-7A B-2 B-2 B-2 5.4c S-2C S-2C S-8 D-7 S-2D S-2D S-2B S-2B S-2A S-2A Profile QTY F-4 1 F-5 1 56 of 81 Connect ors QTY D-7 1 B-2 1 S-7 3 QTY CON N ECTORS S-2A S-2B S-2C S-2D 2 2 5 6 WWW.RSIWW.
5.4D F-4 B-2 F-5 F-4 F-5 5.4E F-4 D-7 F-4 D-7 F-5 5.4F D-7 F-5 WWW.RSIWW.
5.5A W-3 W-3 F-5 B-2 F-5 5.5B S-7A W-3 B-2 F-8 B-2 W-3 W-5 W-5 5.5c W-3 F-5 W-3 Panel QTY W-5 Panel QTY 2 W-3 24” x 18½” Connect ors QTY S-2C S-7 2 2 2 24” x 15 ½” 5.6 F-6 S-7A G-1 G-1 F-6 B-7 B-7 B-7 S-7A F-7 F-7 x2 Connect ors QTY S-7 58 of 81 4 Connect ors QTY B-7 S-2C 2 4 WWW.RSIWW.
5.7A F-7 F-7 F-4 G-1 F-8 F-8 G-1 F-4 F-8 5.7B F-7 S-7A C-1 G-1 C-1 S-7A F-6 S-7A F-7 5.7B x 2 Connect ors Profile QTY 56” F-7 2 5.8 F-6 Check inside corners t o ensure B-7 connect or is st ill in proper posit ion. If it needs adjust ing, repeat st ep 5 .6 unt il each corner is set . WWW.RSIWW.
Assemble Back Gable 6.1A F-2 F-6 G-1 F-10 F-10 F-7 W -1 F-6 F-8 W -1 F-1 W -1 F-8 6.1B F-2 F-2 S-7A F-10 F-10 F-10 F-10 F-1 F-1 Profile QTY F-2 6.2 F-6 S-7A QTY S-7 1 S-2C 1 1 G-1 G-1 F-6 B-7 B-7 B-7 S-7A Connect ors F-7 F-7 Connect ors x2 QTY B-7 S-2C 60 of 81 2 4 WWW.RSIWW.
6.3A B-1 S-7A S-7A S-7A S-7A x3 6.3B F-8 F-2 F-8 F-10 F-10 B-1 F-1 B-1 B-1 6.3c Connect ors x3 QTY B-1 S-2C 3 12 6.4 W-3 W-4 W-4 W-3 Panel QTY W-3 WWW.RSIWW.
6.5A F-7 F-2 F-7 F-8 F-8 6.5B F-7 S-7A C-1 G-1 C-1 S-7A F-6 S-7A F-7 6.5B x 2 Connect ors Profile QTY 56” F-7 2 QTY C-1 2 S-2C 6 S-7 6 6.6 F-6 Check inside corners t o ensure B-7 connect or is st ill in proper posit ion. If it needs adjust ing, repeat st ep 6 .2 unt il each corner is set . 62 of 81 G-1 B-7 F-7 WWW.RSIWW.
Inst all Pre-Assembled Roof Ridge (7.1A - 7.2B) x 1 (see page 27) 7.3A R-1 R-1E R-1E R-1E R-1 R-1 R-1 R-1 R-1E R-1E R-1E R-1 WWW.RSIWW.
7.3B R-1 F-7 F-7 W-5 W-5 7.4 R-1 R-1 B-7 S-7A F-7 F-7 B-7 S-7A S-7A S-7A F-4 F-2 F-4 F-2 F-7 F-7 Connect ors 7.4 x 2 QTY B-7 2 S-2C 4 S-7 4 7.5A R-1 C-2 R-1 C-2 F-7 F-7 F-7 F-7 S-7A S-7A S-7A F-4 F-4 F-2 F-2 7.5A x 2 Connect or 64 of 81 QTY S-7 6 S-2C 6 C-2 2 WWW.RSIWW.
Assemble Roof 1 3 1 2 2 2 2 2 3 3 Sect ion 1 : W-1 Sect ion 2 : W-1 Sect ion 3 : W-1 2 2 2 2 2 3 2 1 3 1 x4 x 11 x 1, W-2 x5 8.1 M at erials: Three 8 ’ 2 x4 s cut t o 7 8 ” +/ -2 ” based on t ype of flooring. WWW.RSIWW.
R-1 8.2A F-7 W-1 G-1 W-1 R-1 F-7 R-1 W-1 W-1 R-1 W-1 F-7 F-7 G-1 G-1 8.2B G-1 W-1 W-1 x2 R-1 F-7 R-1 W-1 F-1 W-1 F-7 F-1 W-1 F-1 W-1 F-1 W-1 F-7 G-1 F-1 G-1 Panel QTY W-1 66 of 81 2 Profile QTY F-1 2 WWW.RSIWW.
8.2c x2 F-1 S-7A S-7A F-1 B-4 B-4 8.2D B-4 F-1 R-1 S-7A F-1 B-4 S-7A 8.2E W-1 W-1 8.2F (8.2B - 8.2D) x 1 F-1 B-4 Profile QTY F-1 WWW.RSIWW.
8.3A W-1 8.3B 8.3c (8.2B) x 1 Note: W-2s will be installed in step 8.4 F -1 x2 F-1 B-4 S-7A 8.3D F-1 F-1 B-4 R-1 S-5B S-7A F-1 R-1 S-7A B-4 S-2C Connect ors Panel QTY W-1 Profile 1 F-1 68 of 81 QTY S-5B 1 B-4 3 QTY S-2C 7 2 S-7 6 WWW.RSIWW.
8.3E W-1 W-1 8.3F (8.2B - 8.2D) x 1 F -1 B -4 B -4 8.3G W-1 Connect ors 8.3H 8.3I (8.2B) x 1 F -1 (8.3c - 8.3D) x 1 Panel W-1 WWW.RSIWW.
8.3J W-1 W-1 8.3K (8.2B - 8.2D) x 1 F -1 B -4 B -4 8.3L W-1 8.3M 8.3N (8.2B) x 1 Connect ors F -1 (8.3c - 8.3D) x 1 Panel W-1 S-5B 1 B-4 6 QTY S-2C 11 4 S-7 10 B -4 QTY Profile 3 F-1 70 of 81 QTY WWW.RSIWW.
8.3O W-1 W-1 W-1 W-1 8.3P (8.2B - 8.2D) x 1 8.3Q (8.2B) x 1 8.3R (8.3c - 8.3D) x 1 B-4 B-4 F-1 Panel B-4 QTY W-1 WWW.RSIWW.
8.4 W-2 W-2 W-2 W-1 W-2 W-1 F-1 F-1 F-1 F-1 F-1 W-1 F-1 W-2 W-2 Panels 72 of 81 QTY W-2 4 W-1 1 WWW.RSIWW.
8.5A x4 S-7 R-1 B-9 F-1 F-1 S-2C B-9 R-1 8.5B 8.5c 8.5D 8.5E 22.5° F-1 F-1 B-11 S-7 x18 S-2C B-11 B-11 F-1 F-1 8.5F 45° R-1 R-1 B-12 F-4 F-4 S-7 x2 F-2 F-2 B-12 S-2C B-12 QTY Brace 22.5° QTY Brace B-9 WWW.RSIWW.
8.6 F-7 C-1 W-8 G-1 G-4 G-1 W-8 = G-4 G-1 G-4 x10 F-7 F-7 C-1 W-10 G-1 x12 G-4 F-1 Trim Plat e G-4 8.7 QTY G-4 4 G-4E 6 W-8 x4 G-1 G-1 W-1 W-1 W-1 W-1 F-1 G-3 F-1 G-3 F-7 F-7 Gut t er Drain QTY G-3 74 of 81 4 WWW.RSIWW.
Inst all Roof Vent s 9.1A 4xs V-3 adjusting knob cylinder 9.1B A = cylinder B A piston rod B arm B 9.1c arm A 9.1D 6” 9.1E (9.1A - 9.1D) x 4 Handle QTY Cylinder 4 WWW.RSIWW.
9.2A Center line for Arm A V-2 A) x” A) x” = B) x” B) x” 9.2B V-2 V-2 V-2 S-1 S-1 V-2 V-2 Fact ory Assem bled Vent QTY V-2 76 of 81 4 WWW.RSIWW.
9.2c 9.2D S-1 S-1 V-2 9.2E gripping channel V-2 S-1 S-1 V-2 Connect or 9.2F 9.3A (9.2A - 9.2E) x 4 S-1 x4 R-2 V-2 F-7 V-2 R-2 WWW.RSIWW.
9.3B W-2 W-2 S-1 S-1 9.3B S-1 S-1 gripping channel 9.3c 9.3A - 9.3B x 4 V-2 NOTE: Make sure arm A overlaps aluminum trim on W-2 W-2 gripping channel Connect or QTY S-1 Gripping Channel 8 QTY 4 9.4A R-1 S-6 V-2 R-1 V-2 R-1 S-6 S-6 V-2 S-6 W-2 Connect or 9.4B 9.4A x 4 QTY S-6 78 of 81 8 WWW.RSIWW.
Inst all Pre-Assembled Doors (10.1A - 10.3D) x 1 (see page 30) 10.4A F-8 90° S-9 D-9 10.4B E-2 10.4c x4 S-9 10.4D D-7 Connect or QTY B-3 S-9 8 10.5 D-4 F-5 F-8 F-8 D-4 D-4 Connect or E-1 P-1B P-1A D-4 WWW.RSIWW.
10.6A S-7 E-3 S-2C D-10 F-8 3xs D-10 10.6B S-7A 10.6c E-3 E-2 D-10 S-9 10.6E 10.6D E-3 S-7 F-8 S-2C D-10 D-10 S-7A 3xs 10.6F E-3 E-2 D-10 D-10 S-9 D-10 Connect ors 80 of 81 QTY Connect ors QTY D-10 2 S-2C 2 S-9 2 S-7 2 WWW.RSIWW.
Secure t o Plat form 11.1 S-4 Connect or x89 11.2A QTY S-4 89 S-2C A-2 A-2 S-7 11.2A x 10 11.2B A-1 x10 Connect ors Bracket QTY A-2 WWW.RSIWW.