Use and Care Manual
ASSEMBLING THE FRAME
1. Identify 3-way & 4-way connectors. 3-way connectors are for the ends and 4-way connectors are for intermediate
rafters, legs and at the peak of greenhouse.
2. Assemble frame as shown in below diagram. DO NOT assemble legs at this time, completed frame must be lifted and
placed on the legs then onto anchor posts.
3-way
connector
3-way
connector
4-way
connector
Leg (5'-1'')
purlin (5'-1'')
purlin (5'-1'')
ALL PURLIN, RAFTERS AND
LEGS ARE THE SAME LENGTH.
Rafter(5'-1")