Use and Care Manual

Installing Eave Extrusion
Eave extrusion is an aluminum channel that receives both the roof and
sidewall polycarbinate sheets.
Aluminum Eave
Extrusion
SIDE PROFILE
Eave Extrusion
bolt track
attaches to
column brackets
channel for sidewall
polycarbinate
channel for
roof
polycarbinate
1. Identify Eave Extrusion.
2. Slide 1/4" x 3/4" stainless steel bolts into
the bolt track, for proper bolt quantity,
count the holes in the bow-to-column
brackets.
3. Flush eave extrusion with end of the
corner leg
4. Align the bolts with the holes in
column-to-rafter brackets and apply 1/4"
stainless steel nuts
5. To splice two pieces of Eave Extrusion,
use 2'' x 6'' aluminum splice plates. At the
end of the first piece of Eave Ext. add two
1/4" x 3/4" bolts also add two bolts at the
start of the second piece.
6. Apply aluminum splice plate and secure
with 1/4'' nuts. Repeat process for
opposite side.
1
1
2
" x 12''
aluminum
splice plate
1/4" s.s. nuts
eave
extrusion
piece #1
eave
extrusion
piece #2
s.s bolts
corner rafter
intermediate
rafter
eave extrusion
column-to-rafter bracket
(corner)
eave extrusion
Page 9