Use and Care Manual

heater
hangers
heater hanger bracket
-slides to inside of end rafter
and second rafter -secure using bolts
and nuts provided
heater hanger
end
rafter
heater hanger cannot
extent past end bow or
damage to end wall
covering will occur
field drill
hole
field drill
hole
place tek screw here
after final alignment
Attach the heater hangers to the end rafter (preferably to the front end rafter) and the second
rafter. Be sure that the heater hanger does not extend past the end rafter because it will damage
the end wall covering when it is installed.
Bolt holes for the heater hanger brackets are to be field drilled into the rafters. IMPORTANT: insert
the bolts from the outside of the greenhouse. If inserted from the inside, it damage end wall
covering.
After you are comfortable with the placement of the heater hangers, secure the heater hanger
brackets to the heater hangers using a tek screw. This step will insure that the heater hanger will
not slide out of place when hanging your heater.
HEATER HANGERS MUST BE INSTALLED
BEFORE COVERING END WALLS
INSTALLING HEATER HANGER
front end rafter
Page 16