Use and Care Manual

Sidewall & Rafter Connections
1. Identify legs for sidewalls:
2'' x 2'' square tubing, quantity depending on
order (refer to packing slip)
The length of the legs depend on the sidewall height of your
order. A sidewall height of 5'-0'' will have legs 58'' long, so the
legs will measure 2'' shorter than the ordered sidewall height.
side
groundrails
corner
legs
2. Place legs on welded stanchions and secure using #14 tek screws.
INTERMEDIATE LEG
VIEW AT CORNER
#14 tek screw
3. After attaching legs to the side groundrails, identify brackets named:
Corner Bow to Column Brackets & Intermediate Bow to Column Brackets
4. Insert column brackets into the top of the legs, let the 1'' flat bar rest on the lip of the leg as shown below
detail A. Note on the corner brackets, the 1'' flat bars have to be facing each
other as indicated in corner bracket profiles. Working from inside the greenhouse, secure
brackets to the legs using #14 tek screws (no lower than 1'' below top of leg) detail B.
5. Take the assemblied rafters and slide them onto the column brackets, working from
the inside of the greenhouse using #14 tek screws to attach to column brackets also shown in detail B.
corner column
bracket
profiles
intermediate column
bracket
profile
intermediate leg
corner leg corner leg
corner bracket holes are facing each other
intermediate
legs
line indicates
lip of leg
1'' flat bar
#14 tek screw attaching
column bracket to leg
#14 tek screw attaching rafter to
column bracket
rafter
leg
column
bracket
detail A
detail B
Page 5