Use and Care Manual

2'' X 2'' TRUSS CHORD DETAIL for
Scholar with 8' sides
Only Intermediate Legs
will have trusses
1. Identify truss chord (2''x 2'' x 15'-8'')
2. Attach L brackets flush with the ends of the truss chords detail A.
3. With the truss chord L brackets facing down toward the ground, attach
truss to the top of the legs detail B. Truss chords are to be placed
only on the intermediate rafters.
4. Identify truss uprights (1
3
8
" x 47'')
5. Secure one end of the upright using supplied bolts to the pre-punched
holes on the truss chord (2x2).
6. Attach the opposite end of the upright to the rafter, at the pre-punched
hole nearest the center connector.
TRUSS CHORD
(2''X 2'')
L BRACKET
detail A.
detail B.
Completed Intermediate Rafter
w/ Truss & Uprights
uprights
2x2
truss chord
TRUSS CHORD(2X2)
LEG
RAFTER
L BRACKET
Page 6