Owner`s manual

Page 17
H42DF-O Outdoor Gas Fireplace
Part No. XG0149
Installation
H42DF-O
Figure 30f. Front Left Log, (Log F).
Installing the Alternate Log Set
Installing the Logs:
The H42DF-O is supplied with a seven ceramic bre log logset. Unpack
the logs and handle them very carefully.
Step 1. Remove the glass door as described on Page 15.
Figure 30a. Bottom Rear Log, (Log A).
Step 2. Place the bottom Rear log (Log A) as shown in gure 30a.
Figure 30b. Left front Log, (Log C) and Right front Log, (Log B).
Step 3. Place the bottom Right log (Log B) and bottom Left Log, (Log
C) as shown in gure 30b.
Air Inlets
Pilot Assembly
Fireplace Base
Rear / Bottom Log
Notch in Log
Log A
Air Inlets
Fireplace Base
Log D
Figure 30c. Top Left Log, (Log D).
Air Inlets
Fireplace Base
Log E
Step 5. Place Front Left log (Log D) as shown in gure 30c.
Figure 30e. Top Right Log, (Log E)..
Step 6. Place Front Right log (Log E) as shown in gure 30e.
Fireplace Base
Log F
Air Inlets
Fireplace Base
Log C
Log B
Step 7. Place Front Left log (Log F) as shown in gure 30f. Set notch
in lower end of Log F against stile on Log Grate.
Figure 30g. Completed Logset.