Operating instructions
P/N XG0675
Page 2
Gas Conversion Kit
Table Of Contents
General Information ................................................................. 2
Parts list .................................................................................... 2
Conversion
Before you begin ............................................................ 3
Install or Remove the Air Inlet Screw .............................3
Converting the Burner Orifice......................................... 3
Converting the Pilot Assembly ....................................... 3
Converting the Main Gas Control Regulator .................. 4
Checking the Gas Pressure ........................................... 4
Adjusting the Pilot Burner............................................... 4
Operation ................................................................................... 5
General Information
This gas conversion kit contains the necessary components for field
conversion of an approved Montigo fireplace from Natural Gas (NG)
to Liquid Propane (LP).This kit is approved for use with the following
Direct Vent (top and rear vent versions) model(s):
H34D
The conversion of this appliance must conform with local codes or,
in the absence of local codes, with the American National Fuel Gas
Code, ANSI Z223.1, or the Canadian Installation Code, CAN / CGA
WARNING!
This conversion kit shall be installed by a qualified service
agency in accordance with the manufacturer's instructions
and all applicable codes and requirements of the authority
having jurisdiction. If the information in these instructions
is not followed exactly, a fire, explosion or production of
carbon monoxide may result causing property damage,
personal injury or loss of life. The qualified service agency
is responsible for the proper installation of this kit. The
installation is not proper and complete until the operation
of the converted appliance is checked as specified in the
manufacturer's instructions supplied with this kit.
Parts List
Quantity Description
1 Pilot Orifice
1 Air Inlet Screw
1 Burner Orifice
1 Hi/Lo Regulator Kit for the gas control valve
1 Label for rating plate indicating conversion
1 Label for gas control valve indicating conversion