Owner`s manual


Page23
XG0649 - 031511

Figure13b Conduit and Wiring Clearances.

Connect the wiring to the linear power vent as outlined in the previ-
ous section, and connect the wiring to the replace as outlined in the
 schematic, gure 13. Ensure that the proper clearances are
maintained for the wiring and conduit. When installing the wiring it
must never run above the vent run and it must be at least 1" clear of
all venting.
1” Clearance
Figure13a.H36PVN,SITIPIWiring Schemmatic