Owner`s manual

Page 6
H*38DF-PFC* Indoor Gas Fireplace
Part No. XG0816 - 100210
Section 2: Framing
Installation
1). Frame in the enclosure for the unit with framing materials. The
framed opening for the assembled replace is 23 3/4" wide, x 44"
high x 41" deep, see Figure 2 .
NOTE: When constructing the framed opening, please ensure
there is access to install the gas line when the unit is installed.
See Figure 22.
Figure 2. Framing dimensions.
Figure 2. Combustible Framing for shelves over the replace, Rear
vent.
Figure 5. Non Combustible Framing with alcove above replace,
Right side. Combustible Framing above replace, Left side, see
gure 3. (Top Vent).
41
23 3/4
44
Figure 3. Combustible Framing for shelves over the replace, Top
vent.
4
6” Min
17 1/2”
2” Min.
44”
Combustible Shelf
Combustible Header
Min.
Exterior
Wall
PEL Short
90 elbow
4” Nailing flange (supplied)
or use Non-combustible
material, See figure 7.
11”
Min.
Combustible Shelf
33 1/2”
44”
Exterior
Wall
Combustible Header
12” Min.
4” Nailing flange (supplied)
or use Non-combustible
material, See figure 7.
Floor
39 5/8”
door
opening
44”
7”
Combustible
Header
Min. 1 ”
2”
Cieling level
Non-Combustible
Header
Non-Combustible
materials. Alcove
over fireplace.
Top Vent
Non-Combustible
Materials, with Low
profile mantel / Alcove
over fireplace. See
figure 7.