Owner`s manual

H*38DF ST Indoor Gas Fireplace
Page 22
XG0207 - 011012.1
Installation
Optional Cultured Rocks
The HL38DF*-ST has the option of installing the cultured rocks which
mimic real stone. These may be spaced at random or in a visual pattern
of your preference in the burner tray. See the Montigo web site for
photographs and ideas. www.montigo.com
Installing Optional Burner Cover kit and Firestones in
Natural Gas Fireplaces
The HL38DFN*ST has the option of a burner cover kit. To install the
restones with the burner cover kit, remove the Door(s) as shown on
page 20. Follow these instructions to ensure all parts are removed or
replaced as required. Once the glass door(s) is removed place the
burner covers and place restones randomly across the pan and the
burner covers as described in Figure 27 to 27b.
Figure 27. Installation of the Optional burner covers ,
(Place the covers end to end; do not overlap).
Fill pan with restones.
Figure 27a. Ensure ONLY one layer of restones cover the
burner and no restones cover the pilot.
Figure 27b. Spread the restones evenly .
Installing Firestones in Natural Gas and Propane Fireplaces
The HL38DF*ST replace is supplied with restones. Remove the
Door(s) as shown on page 20. Follow these instructions to ensure all
parts are removed or replaced as required. Once the glass door(s) is
removed place the restones randomly across the pan as described
in Figure 26 to 26a.
.
Figure 26. Completed restone installation.
(Note: DO NOT place ANY restones on top of the burners or pilot).
Figure 26a. Operating gas replace with restones surrounding
burner tray.
CAUTION!
DO NOT COVER THE BURNERS or PILOT
CAUTION!
Only Natural Gas models have the option of installing a
burner cover kit. Only conceal burner covers with one layer of
restones, or excessive sooting may result.
Ensure the restones DO NOT COVER PILOT.
The restones will get hot while replace is in operation and
should not be handled until cool.