Owner`s manual
H*38DF ST Indoor Gas Fireplace
Page 6
XG0207 - 011012.1
Installation
Section 2: Framing
1). Frame in the enclosure for the unit with framing materials. The
framed opening for the assembled replace is 41¾" wide, x 42½"
high x 23¾" deep, see Figure 2
.
NOTE: When constructing the framed opening, please ensure there is
access to install the gas line when the unit is installed. See Figure 21.
Figure 2. Framing dimensions, (Both Sides Typical).
Figure 5. Combustible Framing for shelves over the replace, Top vent.
Figure 4. Combustible Framing for shelves over the replace, Side vent.
Figure 6. Non Combustible Framing with alcove above replace, Right side.
Combustible Framing above replace, Left side, see gure 2 (Top Vent).
10”
Min.
Combustible Shelf
33 1/2”
42 1/2”
Exterior
Wall
Combustible Header
Combustible material Backframe,
2-pieces. Both Sides Typical.
Floor
36 1/2”
42 1/2”
Combustible
Header
Min. 1 ”
10”
Ceiling level
Non-Combustible
Header
Non-Combustible
materials. Alcove
over fireplace.
Non-Combustible Nail-
ing Flange, (supplied).
Both sides Typical.
See figure
Top Vent
Top View
6¼"
5¼"
25"
(Opening)
36½"
1¼"
1"
35¼"
(Opening)
1¼"1¼"
37¾"
Side View
36½"
33½"
24"
Front View
Typical both sides
Top View
Side ViewFront View
Typical both sides
Models Included: H38FSDN H38FSDL H38FSDNE H38FSDLE
H38FSDNI H38FSDLI HL38FSDNI HL38FSDLI
37¾"
36¼"
Firebox
24"
7⅛"
5"
8"
N
O
M
P
41¾”
23¾”
42½”
5"
8"
6¼”
5¼"
E
B
D
F
C
DD
A
L
G
A
H
G
J
K
J
K
I
41¾” (rough opening)
23¾”
42½”
Both walls Typical. May
not be exactly as shown.
Non-Combustible material
Backframe, 2-pieces. Both
Sides Typical. See figure 3.
6"
46” Min
17 1/2”
Min.
PEL Short
90 elbow
Combustible Shelf
2” Min.
Combustible Header
C
ombustible material Back
f
rame,
2-pieces. Both Sides Typical.
42 1/2”
40 3/4”
Figure 3. Securing the replace to the framing cleats.
8.