Owner`s manual

Page 19
H42DF Series Indoor Gas Fireplace
Part No. XG0148 - 012810
Installation
HL42DF
Installing the HL42DF Glass
Beads and Optional River Rocks
Beads
The HL42DFreplaceissuppliedwithDesignerGlassbeads.
Remove the Door and trim as shown in the previous Instruction.
Follow these instructions to ensure all parts are removed or replaced
asrequired.OncetheTrimandglassdoorsareremovedplacethe
marbles randomly across the pan and the burners as described in
Figure 32 to 32d.
Note: (N.G.) Natural Gas models, Only cover the Optional
burner covers with one layer of designer beads.
Figure 32. Installation of the Optional burner covers , (end to end;
place evenly).
Figure 32a. Installation of the designer beads. (Ensure one layer of
beads covers the burner and pilot covers.
Figure 32b. Spreading designer beads evenly .
Propane HL42DFreplace have the option of installing the optional
cultured rocks or designer glass beads. As described below (Propane
gas), the designer beads or cultured rocks cannot cover the burn-
ers.Doingsoproducesanundesireable/unevenamepattern,and
eventual sooting.
www.montigo.com
Note: (LP gas) Ensure the optional river rocks or designer
glass beads do not cover the Burners.
Figure 32c. Completed glass bead installation.
Figure 32d. Operating Natural gas replace with one layer of designer
glass beads.
Figure 33. Completed glass bead installation. (Note: place glass
beads on top of mesh pilot cover.
Figure 33a. Operating Propane gas replace with designer glass
beads surrounding burner tray.
Optional River Rocks
The HL42DFreplacehastheoptionofinstallingtheculturedrocks
which mimic real stone. These may be spaced at random, or in a
visual pattern of your preference. See the Montigo web site for photo-
graphs and ideas.
www.montigo.com