Instruction manual

The R520ST* / R620ST* is supplied with glass restones. To install
the restones remove the trim and door as shown in the previous
section. Follow these instructions to ensure all parts are removed or
replaced as required. Once the trim and glass door is removed, place
the restones randomly around the burners as shown in Figures 1
Sec.9 and Figure 2 Sec.9.
Note:DONOTcovertheburnerwithrestonesoranyother
media.
Figure 1 Sec.9 Completed glass Firestone installation. Second Gen burner
shown.
Figure 2 Sec.9
Operating Propane gas replace with designer glass Firestones
surrounding burner tray. Second Gen burner shown.
Optional River Rocks
The R520ST*/R620ST* has the option of installing the cultured
rocks which mimic real stone. These may be spaced at random, or
in a visual pattern of your preference. See the Montigo web site for
photographs and ideas.
www.montigo.com
Do not operate this fireplace without the glass door or with a broken glass door.
NOTICE
Section 9: Installing the Firestones
Firestones
R520ST* requires eight 3lbs bags for a total of 24lbs of restones
R620ST* requires nine 3lbs bags for a total of 27lbs of restones
R520-ST & R620-ST Power Vent Indoor Gas Fireplace
Page 23
XG0773 - 150127
Installation