Specifications

Service
Page 16
XG0519 - 070714
PVHFL58-300 & PVHFL510-300 Horizontal Power Vent
Step 6: Using the large bell connector, connect the black bre wire from the
power cable to the black wire from the motor and the black wire from the
capacitor.
Figure 9f.
Step 7: Using the small bell connector, connect the brown wire from the mo-
tor to the black wire from the capacitor.
Figure 9g.
Step 8: Secure the wiring neatly with the supplied zap straps. Check that the
power vent operates and spins counterclockwise. Note: When replacing from
the inside you will need to reinstall the power vent and check spin from the
outside. Note: Ensure wires are secured away from moving parts
Figure 9h.
Go to reinstalling either from outside or inside.